SN74LV4051APW

14ns, 14ns 75Ohm DUAL Analog Switches 74LV4051 16 Pins 100nA 2.3V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74LV4051APW
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 256
Description: 14ns, 14ns 75Ohm DUAL Analog Switches 74LV4051 16 Pins 100nA 2.3V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.3V
Base Part Number	74LV4051
Output	SEPARATE OUTPUT
Pin Count	16
Power Supplies	3.3V
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	2V
Operating Supply Current	20μA
Nominal Supply Current	20μA
Propagation Delay	12 ns
Turn On Delay Time	28 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Supply Type	Single
Bandwidth	35MHz
Supply Current-Max (Isup)	0.04mA
Turn-Off Delay Time	28 ns
On-State Resistance (Max)	75Ohm
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	45 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.5pF 23.4pF
On-state Resistance Match-Nom	2.1Ohm
Switch Time (Ton, Toff) (Max)	14ns, 14ns
Channel-to-Channel Matching (ΔRon)	1.3 Ω
Voltage - Supply, Single (V+)	2V~5.5V
Drain to Source Resistance	100Ohm
Signal Current-Max	0.05A
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	61.887009mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	100Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)

SN74LV4051APW Overview

As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. High reliability is achieved by using advanced packaging method Tube. A switch device like this is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Operating temperature extended to -40°C~85°C TA. There are 16 terminations totally. A 8 channel electronic part produces high-quality output. When a voltage supply of 2.3V is used, the electronic component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Circuits number 1 make up this analogue multiplexer. Using the 74LV4051 search parameter, you can discover variants of the switch. An switch multiplexer with 100Ohm internal resistance has a value of 100Ohm. The functions of 16 pins can be found in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. normally, users should not supply switches with voltages higher than 5.5V. An effective Single supply digital multiplexer. The lowest voltage fed to the electronic component should be 2V. The switch device would be able to operate with 20μA current. This analog switch requires a voltage of 2V~5.5V to drain from a single voltage supply. There are SEPARATE OUTPUT outputs on this analog switch ic. A 8 input needs to be operated. The data can be transferred over a wide range of bandwidths, called 35MHz bandwidths. It has a Drain to Source resistance of 100Ohm ohms.