Parameters |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.3V |
Base Part Number |
74LV4051 |
Pin Count |
16 |
Polarity |
Non-Inverting |
Power Supplies |
3.3V |
Number of Channels |
8 |
Number of Circuits |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2V |
Operating Supply Current |
20μA |
Nominal Supply Current |
20μA |
Propagation Delay |
12 ns |
Turn On Delay Time |
28 ns |
Logic Function |
Demultiplexer, Multiplexer |
Number of Inputs |
8 |
Supply Type |
Single |
Bandwidth |
35MHz |
Supply Current-Max (Isup) |
0.04mA |
Turn-Off Delay Time |
28 ns |
On-State Resistance (Max) |
75Ohm |
High Level Output Current |
25mA |
Low Level Output Current |
25mA |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
45 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
0.5pF 23.4pF |
On-state Resistance Match-Nom |
2.1Ohm |
Switch Time (Ton, Toff) (Max) |
14ns, 14ns |
Channel-to-Channel Matching (ΔRon) |
1.3 Ω |
Voltage - Supply, Single (V+) |
2V~5.5V |
Max Junction Temperature (Tj) |
150°C |
Ambient Temperature Range High |
85°C |
Signal Current-Max |
0.05A |
On-State Resistance |
22Ohm |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 18 hours ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Weight |
61.887009mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Cut Tape (CT) |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
75Ohm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
SN74LV4051APWR Overview
Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Cut Tape (CT). The multiplexer is located in Surface Mount. 8:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature extended to -40°C~85°C TA. Total terminations are 16. This electronic part offers high-quality output due to its 8 channels. In the case of a voltage supply of 2.3V volts, the electrical part can be powered up and run. The electronic part body is injected with 16 pins. This multiplexer is composed of 1 circuits. Using the 74LV4051 search parameter, you can discover variants of the switch. As far as internal resistance is concerned, it has 75Ohm. You can find the functions of the 16 pins in the datasheets. This switch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. A cost-effective Single supply type analogue multiplexer. A low voltage of 2V should be applied to the electronic component. It would be sufficient to run this analogue multiplexer with 20μA current. Using a single voltage supply, this switch device consumes 2V~5.5V volts. In order to operate the 8 inputs, there are several steps to follow. It is possible to transfer data over a 35MHz-bandwidth.
SN74LV4051APWR Features
8 Channels
20μA Supply Current
Bandwidth: 35MHz
SN74LV4051APWR Applications
There are a lot of Texas Instruments SN74LV4051APWR Analog Switches & Multiplexers ICs applications.
- 65 V DACs
- Audio signal routing
- Automatic test equipment
- Audio/video switches
- Sample-and-hold systems
- Video switching
- Avionics
- Residential Gateways, Home Gateway/Router
- High-Voltage
- Intelligent PBX