Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Weight |
61.887009mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
75Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.3V |
Base Part Number |
74LV4051 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Power Supplies |
3.3V |
Number of Channels |
8 |
Number of Circuits |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2V |
Operating Supply Current |
20μA |
Nominal Supply Current |
20μA |
Propagation Delay |
12 ns |
Turn On Delay Time |
28 ns |
Logic Function |
Demultiplexer, Multiplexer |
Number of Inputs |
8 |
Supply Type |
Single |
Bandwidth |
35MHz |
Supply Current-Max (Isup) |
0.04mA |
Turn-Off Delay Time |
28 ns |
On-State Resistance (Max) |
75Ohm |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
45 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
0.5pF 23.4pF |
On-state Resistance Match-Nom |
2.1Ohm |
Switch Time (Ton, Toff) (Max) |
14ns, 14ns |
Channel-to-Channel Matching (ΔRon) |
1.3 Ω |
Voltage - Supply, Single (V+) |
2V~5.5V |
Signal Current-Max |
0.05A |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74LV4051APWRG4 Overview
Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. The total number of terminations is 16. This electronic part offers high-quality output due to its 8 channels. With a 2.3V voltage supply, the electrical component should be turned on and run. As part of its design, the 16 series is equipped with this electronic component. This multiplexer is composed of 1 circuits. If you are looking for variants of the digital switch, trying search with 74LV4051. As far as internal resistance is concerned, it has 75Ohm. Datasheets for 16 pin functions are available upon request. This switch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. A cost-effective Single supply type analogue multiplexer. The lowest voltage fed to the electronic component should be 2V. The switch device would be able to operate with 20μA current. The voltage required by this switch device is 2V~5.5V, draining from a single voltage supply. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. The 8 inputs need to be operated in order to work. It is possible to transfer data over a 35MHz-bandwidth.
SN74LV4051APWRG4 Features
8 Channels
20μA Supply Current
Bandwidth: 35MHz
SN74LV4051APWRG4 Applications
There are a lot of Texas Instruments SN74LV4051APWRG4 Analog Switches & Multiplexers ICs applications.
- Industrial and process control systems
- Ultrasound
- Fault Tolerant Systems
- Sample-and-hold systems
- Cellular phones
- New designs requiring multiplexer functions
- Transmit
- Frame Relay Equipment
- ATM
- SDH/SONET multiplexers