SN74LV4051AQPWRQ1
| Parameters | |
|---|---|
| Min Supply Voltage | 2V |
| Operating Supply Current | 20μA |
| Propagation Delay | 1.5 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Single |
| Bandwidth | 35MHz |
| Supply Current-Max (Isup) | 0.02mA |
| On-State Resistance (Max) | 75Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 45 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 0.5pF 23.4pF |
| On-state Resistance Match-Nom | 2.1Ohm |
| Switch Time (Ton, Toff) (Max) | 14ns, 14ns |
| Channel-to-Channel Matching (ΔRon) | 1.3 Ω |
| Switch-on Time-Max | 25ns |
| Switch-off Time-Max | 25ns |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Signal Current-Max | 0.05A |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 75Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV4051 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
SN74LV4051AQPWRQ1 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). High reliability is achieved by using advanced packaging method Cut Tape (CT). There is an analog multiplexer mounted in position Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. An extended operating temperature of -40°C~125°C TA degrees Celsius. Total terminations are 16. As a result of its 8 channels, this electronic component provides high-quality output. A 2.3V voltage supply should turn on and run the electronic component. A key feature of the 16 series is the inclusion of this electronic part as part of its design. The circuits in this analogue multiplexer number 1. Try searching with 74LV4051 to find analog multiplexer variants. There is 75Ohm internal resistance in this digital multiplexer. The functions of 16 pins can be found in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. A analog switch ic that has a cost-effective Single supply type. The lowest voltage fed to the electronic component should be 2V. An operating current of 20μA would be sufficient for this switch device. The voltage required by this switch device is 2V~5.5V, draining from a single voltage supply. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. Operating 8 inputs is required. The transfer of data can be performed over 35MHz bandwidths. The Automotive, AEC-Q100 series includes it.
SN74LV4051AQPWRQ1 Features
8 Channels
20μA Supply Current
Bandwidth: 35MHz
SN74LV4051AQPWRQ1 Applications
There are a lot of Texas Instruments SN74LV4051AQPWRQ1 Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- Battery Powered Instruments
- Cable Modem
- Remote wireless modules
- DSUs
- Data switching
- Optical Applications
- PDH Multiplexers
- Private Branch Exchange (PBX)
- Power routing
