SN74LV4051ARGYR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Weight | 37.194574mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 75Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LV4051 |
| Pin Count | 16 |
| Polarity | Non-Inverting |
| Power Supplies | 2.5/5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 20μA |
| Propagation Delay | 7 ns |
| Turn On Delay Time | 28 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Single |
| Bandwidth | 35MHz |
| Supply Current-Max (Isup) | 0.04mA |
| Turn-Off Delay Time | 28 ns |
| On-State Resistance (Max) | 75Ohm |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 45 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 0.5pF 23.4pF |
| On-state Resistance Match-Nom | 2.1Ohm |
| Switch Time (Ton, Toff) (Max) | 14ns, 14ns |
| Channel-to-Channel Matching (ΔRon) | 1.3 Ω |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Signal Current-Max | 0.05A |
| Height | 1mm |
| Length | 4mm |
| Width | 3.5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV4051ARGYR Overview
Packed in 16-VFQFN Exposed Pad, the electronic component is convenient for shipping overseas. To ensure high reliability, a new packaging method Cut Tape (CT) is used. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 8:1. Extended operating temperature around -40°C~85°C TA. In total, 16 terminations have occurred. This electronic part offers high-quality output due to its 8 channels. Powered by a 2.3V voltage supply, the electrical part should be switched on and run. It is part of the design of the 16 series that this electronic component is included. There are 1 circuits in this multiplexer. Try searching with 74LV4051 to find analog multiplexer variants. This digital multiplexer has 75Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. An effective Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 2V. The analogue multiplexer could operate on 20μA current. Using a single voltage supply, this switch device consumes 2V~5.5V volts. The electrical component supports 8 inputs. 35MHz bandwidths enable data to be transferred.
SN74LV4051ARGYR Features
8 Channels
20μA Supply Current
Bandwidth: 35MHz
SN74LV4051ARGYR Applications
There are a lot of Texas Instruments SN74LV4051ARGYR Analog Switches & Multiplexers ICs applications.
- Communications systems
- RGB switches
- Private Branch Exchange (PBX)
- Cellular phones
- Modems
- Automatic test equipment
- ISDN NT1/TA
- Communication systems
- DSUs
- Channelized and Unchannelized DS3 applications
