SN74LV4051ATDRQ1
| Parameters | |
|---|---|
| Turn-Off Delay Time | 20 ns |
| On-State Resistance (Max) | 75Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 45 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 0.5pF 23.4pF |
| On-state Resistance Match-Nom | 2.1Ohm |
| Switch Time (Ton, Toff) (Max) | 14ns, 14ns |
| Channel-to-Channel Matching (ΔRon) | 1.3 Ω |
| Switch-on Time-Max | 25ns |
| Switch-off Time-Max | 25ns |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Signal Current-Max | 0.05A |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 75Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.3V |
| Base Part Number | 74LV4051 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Power Supplies | 3.3V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 20μA |
| Propagation Delay | 7 ns |
| Turn On Delay Time | 20 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Single |
| Bandwidth | 35MHz |
| Supply Current-Max (Isup) | 0.02mA |
SN74LV4051ATDRQ1 Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 8:1. Operating temperature extended to -40°C~105°C TA. In total, 16 terminations have occurred. High-quality output is provided by the electronic component's 8 channels. A 2.3V voltage supply should turn on and run the electronic component. As part of the design of the 16 series, this electronic part has been incorporated into the system. A 1 circuit is present in this switch device. Look for analog switch ic variants by searching with 74LV4051. Internally, this switch multiplexer has a resistance of 75Ohm. For functions related to 16 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. A voltage higher than 5.5V should not normally be supplied to the switches. An effective Single supply digital multiplexer. The lowest voltage fed to the electronic component should be 2V. 20μA current would be enough for this multiplexer to operate. A voltage of 2V~5.5V is required to drain this analog switch from a single voltage supply. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. Operating the 8 inputs requires 8 inputs. A 35MHz-bandwidth can be used for data transfer. It belongs to the series Automotive, AEC-Q100.
SN74LV4051ATDRQ1 Features
8 Channels
20μA Supply Current
Bandwidth: 35MHz
SN74LV4051ATDRQ1 Applications
There are a lot of Texas Instruments SN74LV4051ATDRQ1 Analog Switches & Multiplexers ICs applications.
- PDAs
- RGB switches
- Fiber In The Loop (FITL)
- Digital cross connects (DSX-1)
- E1 Network Equipment
- Digital access cross connects
- Private Branch Exchange (PBX)
- Signal routing between systems
- T1/E1 Terminals
- HDTV
