SN74LV4052ADGVR

14ns, 14ns SP4T 75Ohm DUAL Analog Switches 74LV4052 16 Pins 100nA 2.5V 16-TFSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74LV4052ADGVR
Package: 16-TFSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 486
Description: 14ns, 14ns SP4T 75Ohm DUAL Analog Switches 74LV4052 16 Pins 100nA 2.5V 16-TFSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TFSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	41.900595mg
Operating Temperature	-40°C~85°C TA
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	100Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Base Part Number	74LV4052
Pin Count	16
Polarity	Non-Inverting
Power Supplies	3.3V
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	2V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	20μA
Nominal Supply Current	20μA
Number of Bits	4
Propagation Delay	16 ns
Turn On Delay Time	28 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Supply Type	Single
Bandwidth	50MHz
Turn-Off Delay Time	28 ns
On-State Resistance (Max)	75Ohm
High Level Output Current	25mA
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	45 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.5pF 13.1pF
On-state Resistance Match-Nom	1.5Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	14ns, 14ns
Channel-to-Channel Matching (ΔRon)	700m Ω
Crosstalk	-45dB @ 1MHz
Switch-on Time-Max	35ns
Switch-off Time-Max	35ns
Voltage - Supply, Single (V+)	2V~5.5V
Signal Current-Max	0.05A
Height	1.2mm
Length	3.6mm
Width	4.4mm
Thickness	1.05mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74LV4052ADGVR Overview

Shipping overseas is convenient due to the electrical component's packing in 16-TFSOP (0.173, 4.40mm Width). High reliability is achieved by using advanced packaging method Cut Tape (CT). The multiplexer is located in Surface Mount. There is 4:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around -40°C~85°C TA. Totally, there are 16 terminations. As a result of its 2 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 2.5V voltage supply. There is an electrical component included in the 16 series. These analog multiplexers are built based on SP4T switching circuits. Circuits number 2 make up this analogue multiplexer. 74LV4052 can be used to search for analog multiplexer variants. It has an internal resistance of 100Ohm. You can find the functions of the 16 pins in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. The digital multiplexer has a low cost Single supply. 2V should be the lowest voltage fed to the electronic component. For this digital switch to work, 20μA current would suffice. The voltage required by this switch device is 2V~5.5V, draining from a single voltage supply. Integrated with an analog IC DIFFERENTIAL MULTIPLEXER. The electrical component supports 8 inputs. The data can be transferred over a wide range of bandwidths, called 50MHz bandwidths. 4-bit conductivity is possible.