SN74LV4052AN

14ns, 14ns SP4T 75Ohm DUAL Analog Switches 74LV4052 16 Pins 100nA 2.5V 16-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74LV4052AN
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 283
Description: 14ns, 14ns SP4T 75Ohm DUAL Analog Switches 74LV4052 16 Pins 100nA 2.5V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 21 hours ago)
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Weight	951.693491mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	100Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	1
Supply Voltage	2.5V
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	74LV4052
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Polarity	Non-Inverting
Power Supplies	3.3V
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	2V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	20μA
Nominal Supply Current	20μA
Number of Bits	4
Propagation Delay	12 ns
Turn On Delay Time	28 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Supply Type	Single
Bandwidth	50MHz
Turn-Off Delay Time	28 ns
On-State Resistance (Max)	75Ohm
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	45 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.5pF 13.1pF
On-state Resistance Match-Nom	1.5Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	14ns, 14ns
Channel-to-Channel Matching (ΔRon)	700m Ω
Crosstalk	-45dB @ 1MHz
Switch-on Time-Max	35ns
Switch-off Time-Max	35ns
Voltage - Supply, Single (V+)	2V~5.5V
Signal Current-Max	0.05A
Height	5.08mm
Length	19.3mm
Width	6.35mm
Thickness	3.9mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74LV4052AN Overview

This electronic part is conveniently packaged in 16-DIP (0.300, 7.62mm), making it easy to ship abroad. To ensure high reliability, a new packaging method Tube is used. This analog switch is mounted in Through Hole. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. Extended operating temperature around -40°C~85°C TA. The total number of terminations is 16. A high-quality output is provided by the electrical component's 2 channels. If the voltage supply is 2.5V volts, the electrical component should be turned on and run. An electrical component like this is included in the 16 series. Based on SP4T switching circuits, these analog multiplexers work. A 2 circuit is present in this switch device. Search with 74LV4052 if you are looking for analog multiplexer variants. It has an internal resistance of 100Ohm. Datasheets for 16 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. Analogue multiplexer with a Single supply type that is cost-effective. The lowest voltage the electronic part should receive is 2V. This multiplexer would work with 20μA current. A voltage of 2V~5.5V is required for this switch device, which drains from a single voltage source. A DIFFERENTIAL MULTIPLEXER analog IC is integrated into the board. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. A 8 input needs to be operated. 50MHz bandwidths enable data to be transferred. It can conduct 4-bit signals.