SN74LV4052APWE4

14ns, 14ns SP4T 75Ohm DUAL Analog Switches 74LV4052 16 Pins 100nA 2.5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74LV4052APWE4
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 455
Description: 14ns, 14ns SP4T 75Ohm DUAL Analog Switches 74LV4052 16 Pins 100nA 2.5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	61.887009mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	100Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	74LV4052
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Power Supplies	3.3V
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	2V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	20μA
Nominal Supply Current	20μA
Number of Bits	4
Propagation Delay	16 ns
Turn On Delay Time	28 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Supply Type	Single
Bandwidth	50MHz
Turn-Off Delay Time	28 ns
On-State Resistance (Max)	75Ohm
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	45 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.5pF 13.1pF
On-state Resistance Match-Nom	1.5Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	14ns, 14ns
Channel-to-Channel Matching (ΔRon)	700m Ω
Crosstalk	-45dB @ 1MHz
Switch-on Time-Max	35ns
Switch-off Time-Max	35ns
Voltage - Supply, Single (V+)	2V~5.5V
Signal Current-Max	0.05A
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74LV4052APWE4 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a ratio of 4:1. Operational temperature extended around -40°C~85°C TA. In total, there have been 16 terminations. Due to its 2 channels, the electrical component produces high-quality output. When the electronic component is given a voltage of 2.5V, it should be turned on and run. A total of 16 pins are injected into the body of the electronic part. On the other hand, analog switches can be constructed using SP4T switching circuits. There are 2 circuits in this switch device. Try searching for the analog switch ic with 74LV4052 if you are looking for variants. It has an internal resistance of 100Ohm. The datasheets for the 16 pins explain the functions. A analogue multiplexer of this type is a Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. Analogue multiplexers of the Single supply type that are cost-effective. 2V is the lowest voltage that should be fed to the electronic electronic part. For this multiplexer to operate, 20μA current would be sufficient. Analogue multiplexers require a 2V~5.5V voltage to drain from a single voltage supply. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. There are 8 inputs to be operated. This switch operates within the bandwidth of 50MHz. The switch device is capable of conducting in a 4-bit mode.