SN74LV4052APWG4

14ns, 14ns SP4T 75Ohm DUAL Analog Switches 74LV4052 16 Pins 100nA 2.5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74LV4052APWG4
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 329
Description: 14ns, 14ns SP4T 75Ohm DUAL Analog Switches 74LV4052 16 Pins 100nA 2.5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.5pF 13.1pF
On-state Resistance Match-Nom	1.5Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	14ns, 14ns
Channel-to-Channel Matching (ΔRon)	700m Ω
Crosstalk	-45dB @ 1MHz
Switch-on Time-Max	35ns
Switch-off Time-Max	35ns
Voltage - Supply, Single (V+)	2V~5.5V
Signal Current-Max	0.05A
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	61.887009mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	100Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Base Part Number	74LV4052
Output	SEPARATE OUTPUT
Pin Count	16
Power Supplies	3.3V
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	2V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	20μA
Nominal Supply Current	20μA
Number of Bits	4
Propagation Delay	12 ns
Turn On Delay Time	28 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Supply Type	Single
Bandwidth	50MHz
Turn-Off Delay Time	28 ns
On-State Resistance (Max)	75Ohm
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	45 dB

SN74LV4052APWG4 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). High reliability is achieved by using advanced packaging method Tube. This analog switch is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 4:1. Operating temperature extended to -40°C~85°C TA. There are 16 terminations totally. A high-quality output is provided by the electrical component's 2 channels. It is safe to turn on and run the electronic component with a 2.5V voltage supply. Into the electrical component body are injected 16 pins. Multiplexers built on a SP4T switching circuit are built. It consists of 2 circuits. Look for analog switch ic variants by searching with 74LV4052. Internally, this switch multiplexer has a resistance of 100Ohm. The datasheets for the 16 pins explain the functions. It is a typical Multiplexer or Switches analog multiplexer. normally, users should not supply switches with voltages higher than 5.5V. Analog switch ics with Single supply type are cost-effective. 2V is the lowest voltage that should be fed to the electronic electronic part. The analogue multiplexer could operate on 20μA current. Draining from a single voltage supply, this analog switch requires a voltage of 2V~5.5V. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board. This analog switch ic utilizes SEPARATE OUTPUT output. Operating 8 inputs is required. There are 50MHz bandwidths for data transfer. The switch device is capable of conducting in a 4-bit mode.