banner_page

SN74LV4052APWRE4

14ns, 14ns SP4T 75Ohm DUAL Analog Switches 74LV4052 16 Pins 100nA 2.5V 16-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74LV4052APWRE4
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 488
  • Description: 14ns, 14ns SP4T 75Ohm DUAL Analog Switches 74LV4052 16 Pins 100nA 2.5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Switch-off Time-Max 35ns
Voltage - Supply, Single (V+) 2V~5.5V
Signal Current-Max 0.05A
Height 1.2mm
Length 5mm
Width 4.4mm
Thickness 1mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Weight 61.887009mg
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Resistance 100Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Multiplexer or Switches
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.5V
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 74LV4052
Output SEPARATE OUTPUT
Pin Count 16
Qualification Status Not Qualified
Power Supplies 3.3V
Number of Channels 2
Number of Circuits 2
Max Supply Voltage 5.5V
Min Supply Voltage 2V
Analog IC - Other Type DIFFERENTIAL MULTIPLEXER
Operating Supply Current 20μA
Nominal Supply Current 20μA
Number of Bits 4
Propagation Delay 12 ns
Turn On Delay Time 28 ns
Logic Function Demultiplexer, Multiplexer
Number of Inputs 8
Supply Type Single
Bandwidth 50MHz
Turn-Off Delay Time 28 ns
On-State Resistance (Max) 75Ohm
Multiplexer/Demultiplexer Circuit 4:1
Off-state Isolation-Nom 45 dB
Current - Leakage (IS(off)) (Max) 100nA
Channel Capacitance (CS(off), CD(off)) 0.5pF 13.1pF
On-state Resistance Match-Nom 1.5Ohm
Switch Circuit SP4T
Switch Time (Ton, Toff) (Max) 14ns, 14ns
Channel-to-Channel Matching (ΔRon) 700m Ω
Crosstalk -45dB @ 1MHz
Switch-on Time-Max 35ns

SN74LV4052APWRE4 Overview


The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. Around -40°C~85°C TA is the extended operating temperature. 16 terminations have been made so far. This electronic part offers high-quality output due to its 2 channels. It is safe to turn on and run the electronic component with a 2.5V voltage supply. An electrical component like this is included in the 16 series. Unlike digital switches, these are based on SP4T switching circuits. Circuits number 2 make up this analogue multiplexer. Try searching for 74LV4052 variants of the analog switch ic. An switch multiplexer with 100Ohm internal resistance has a value of 100Ohm. For functions related to 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. Single supply type digital switch with a low cost. In order for the electronic part to function properly, the lowest voltage should be 2V. It would be sufficient to run this analogue multiplexer with 20μA current. Draining from a single voltage supply, this analog switch requires a voltage of 2V~5.5V. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. There are 8 inputs to be operated. A 50MHz-bandwidth can be used for data transfer. 4-bit operation is possible.

SN74LV4052APWRE4 Features


2 Channels
Switch Circuit: SP4T
20μA Supply Current
Bandwidth: 50MHz
4-Bit

SN74LV4052APWRE4 Applications


There are a lot of Texas Instruments SN74LV4052APWRE4 Analog Switches & Multiplexers ICs applications.

  • Battery Powered Instruments
  • Battery-powered systems
  • Existing multiplexer applications (both fault-protected and nonfault-protected)
  • USB 1.1 signal switching circuits
  • 65 V DACs
  • Avionics test equipment
  • SDH/SONET multiplexers
  • Communication systems
  • Wireless Local Loop
  • HDTV

Write a review

Note: HTML is not translated!
    Bad           Good