SN74LV4052APWRG4

14ns, 14ns SP4T 75Ohm DUAL Analog Switches 74LV4052 16 Pins 100nA 2.5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74LV4052APWRG4
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 730
Description: 14ns, 14ns SP4T 75Ohm DUAL Analog Switches 74LV4052 16 Pins 100nA 2.5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	61.887009mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	100Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Base Part Number	74LV4052
Output	SEPARATE OUTPUT
Pin Count	16
Power Supplies	3.3V
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	2V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	20μA
Nominal Supply Current	20μA
Number of Bits	4
Propagation Delay	12 ns
Turn On Delay Time	28 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Supply Type	Single
Bandwidth	50MHz
Turn-Off Delay Time	28 ns
On-State Resistance (Max)	75Ohm
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	45 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.5pF 13.1pF
On-state Resistance Match-Nom	1.5Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	14ns, 14ns
Channel-to-Channel Matching (ΔRon)	700m Ω
Crosstalk	-45dB @ 1MHz
Switch-on Time-Max	35ns
Switch-off Time-Max	35ns
Voltage - Supply, Single (V+)	2V~5.5V
Signal Current-Max	0.05A
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74LV4052APWRG4 Overview

This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. Multiplexer and demultiplexer circuits have a number 4:1. Around -40°C~85°C TA is the extended operating temperature. There are 16 terminations totally. A 2 channel electronic part produces high-quality output. An 2.5V voltage supply should allow the electrical part to be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Multiplexers built on a SP4T switching circuit are built. 2 circuits are used in this analogue multiplexer. Look for analog switch ic variants by searching with 74LV4052. There is 100Ohm internal resistance in this digital multiplexer. For details about the functions of 16 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. A voltage higher than 5.5V should not normally be supplied to the switches. Single supply type digital switch with a low cost. It is recommended that the electrical component receives a voltage of 2V. The analogue multiplexer could operate on 20μA current. The voltage required by this switch device is 2V~5.5V, draining from a single voltage supply. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. Operating 8 inputs is required. It is possible to transfer data over a 50MHz-bandwidth. 4-bits are supported.