Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Cut Tape (CT) |
Series |
Automotive, AEC-Q100 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
100Ohm |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Base Part Number |
74LV4052 |
Pin Count |
16 |
Power Supplies |
3.3V |
Number of Channels |
4 |
Number of Circuits |
2 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2V |
Analog IC - Other Type |
DIFFERENTIAL MULTIPLEXER |
Operating Supply Current |
20μA |
Number of Bits |
4 |
Propagation Delay |
14 ns |
Turn On Delay Time |
18 ns |
Logic Function |
Demultiplexer, Multiplexer |
Number of Inputs |
8 |
Supply Type |
Single |
Bandwidth |
50MHz |
Turn-Off Delay Time |
18 ns |
On-State Resistance (Max) |
100Ohm |
High Level Output Current |
25mA |
Low Level Output Current |
25mA |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
45 dB |
Current - Leakage (IS(off)) (Max) |
1μA |
On-state Resistance Match-Nom |
40Ohm |
Switch Circuit |
SP4T |
Switch Time (Ton, Toff) (Max) |
18ns, 18ns |
Channel-to-Channel Matching (ΔRon) |
20 Ω (Max) |
Crosstalk |
-45dB @ 1MHz |
Voltage - Supply, Single (V+) |
2V~5.5V |
Signal Current-Max |
0.05A |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74LV4052AQPWRQ1 Overview
Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Cut Tape (CT). In Surface Mount, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. Temperatures around -40°C~125°C TA are extended for operation. Totally, there are 16 terminations. This electronic part offers high-quality output due to its 4 channels. It is safe to turn on and run the electronic component with a 3.3V voltage supply. As part of its design, the 16 series is equipped with this electronic component. Unlike digital switches, these are based on SP4T switching circuits. A total of 2 circuits make up this switch device. Use 74LV4052 to search for variants of the digital switches. An switch multiplexer with 100Ohm internal resistance has a value of 100Ohm. Please refer to the datasheets for 16 pins functions. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Analogue multiplexers of the Single supply type that are cost-effective. A low voltage of 2V should be applied to the electronic component. The analogue multiplexer could operate on 20μA current. Analogue multiplexers require a 2V~5.5V voltage to drain from a single voltage supply. Integrated with an analog IC DIFFERENTIAL MULTIPLEXER. There are 8 inputs to be operated. There are 50MHz bandwidths for data transfer. 4-bits are supported. The series starts with Automotive, AEC-Q100.
SN74LV4052AQPWRQ1 Features
4 Channels
Switch Circuit: SP4T
20μA Supply Current
Bandwidth: 50MHz
4-Bit
SN74LV4052AQPWRQ1 Applications
There are a lot of Texas Instruments SN74LV4052AQPWRQ1 Analog Switches & Multiplexers ICs applications.
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Remote wireless modules
- Automotive applications
- Routers
- Digital cross connects (DSX-1)
- Medical systems
- Medical Instrumentation
- Voice over IP/DSL – Integrated Access Devices, Smart
- Residential Gateways, Home Gateway/Router
- ATM