SN74LV4052ARGYR

14ns, 14ns SP4T 75Ohm QUAD Analog Switches 74LV4052 16 Pins 100nA 2.5V 16-VFQFN Exposed Pad

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74LV4052ARGYR
Package: 16-VFQFN Exposed Pad
Datasheet: -
Stock: 425
Description: 14ns, 14ns SP4T 75Ohm QUAD Analog Switches 74LV4052 16 Pins 100nA 2.5V 16-VFQFN Exposed Pad(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-VFQFN Exposed Pad
Number of Pins	16
Weight	37.194574mg
Operating Temperature	-40°C~85°C TA
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	16
ECCN Code	EAR99
Resistance	100Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Terminal Pitch	0.5mm
Base Part Number	74LV4052
Output	SEPARATE OUTPUT
Pin Count	16
Polarity	Non-Inverting
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	2V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	20μA
Nominal Supply Current	20μA
Number of Bits	4
Propagation Delay	12 ns
Turn On Delay Time	28 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Supply Type	Single
Bandwidth	50MHz
Turn-Off Delay Time	28 ns
On-State Resistance (Max)	75Ohm
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	45 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.5pF 13.1pF
On-state Resistance Match-Nom	1.5Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	14ns, 14ns
Channel-to-Channel Matching (ΔRon)	700m Ω
Crosstalk	-45dB @ 1MHz
Switch-on Time-Max	35ns
Switch-off Time-Max	35ns
Voltage - Supply, Single (V+)	2V~5.5V
Signal Current-Max	0.05A
Height	1mm
Length	4mm
Width	3.5mm
Thickness	900μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74LV4052ARGYR Overview

Due to its 16-VFQFN Exposed Pad packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Cut Tape (CT). In Surface Mount, this analog switch is mounted. There is 4:1 ratio between the number of multiplexers and demultiplexers. Operating temperature extended to -40°C~85°C TA. In total, there are 16 terminations. A 2 channel electronic part produces high-quality output. When the electronic component is given a voltage of 2.5V, it should be turned on and run. This electronic part can be found in the 16 series. Unlike digital switches, these are based on SP4T switching circuits. The multiplexer consists of 2 circuits. Try searching with 74LV4052 to find analog multiplexer variants. The internal resistance of this digital multiplexer is 100Ohm. You can find the functions of the 16 pins in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. A voltage higher than 5.5V should not normally be supplied to the switches. Analogue multiplexer with a Single supply type that is cost-effective. A low voltage of 2V should be applied to the electronic component. In order to operate this switch device, it would need a current of 20μA. Using a single voltage supply, this switch device consumes 2V~5.5V volts. An analog IC with the number DIFFERENTIAL MULTIPLEXER is integrated into this board. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. Operating the 8 inputs requires 8 inputs. It is possible to transfer data over a 50MHz-bandwidth. 4-bits are supported.