SN74LV4052ATDRQ1
| Parameters | |
|---|---|
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 18ns, 18ns |
| Channel-to-Channel Matching (ΔRon) | 20 Ω (Max) |
| Crosstalk | -45dB @ 1MHz |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Signal Current-Max | 0.05A |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 100Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV4052 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 20μA |
| Number of Bits | 4 |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 25 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Single |
| Bandwidth | 50MHz |
| Turn-Off Delay Time | 25 ns |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 45 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| On-state Resistance Match-Nom | 40Ohm |
SN74LV4052ATDRQ1 Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a ratio of 4:1. Operational temperature extended around -40°C~105°C TA. 16 terminations have been made so far. By its 4 channels, the electronic component provides high-quality output. A 3.3V voltage supply should turn on and run the electronic component. An electrical component of this type can be found in the 16 series. A SP4T switching circuit is used to build these analog multiplexers. This multiplexer is composed of 2 circuits. If you are looking for variants of the digital switch, trying search with 74LV4052. In this multiplexer, the internal resistance is 100Ohm. For details about the functions of 16 pins, please refer to the datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. A analog switch ic that has a cost-effective Single supply type. 2V is the lowest voltage the electrical component should receive. This multiplexer would work with 20μA current. This analog switch requires a voltage of 2V~5.5V to drain from a single voltage supply. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. The 8 inputs need to be operated in order to work. The transfer of data can be performed over 50MHz bandwidths. 4-bit operation is possible. Automotive, AEC-Q100 is a series number.
SN74LV4052ATDRQ1 Features
4 Channels
Switch Circuit: SP4T
20μA Supply Current
Bandwidth: 50MHz
4-Bit
SN74LV4052ATDRQ1 Applications
There are a lot of Texas Instruments SN74LV4052ATDRQ1 Analog Switches & Multiplexers ICs applications.
- High speed data transmission line cards
- SDH/SONET multiplexers
- High-Voltage
- Cell phones
- Cable Modem
- Remote wireless modules
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- SDH
- SONET
- Digital Cross-Connects
