SN74LV4052ATPWREP

18ns, 18ns SP4T 100Ohm DUAL Analog Switches 74LV4052 16 Pins 1μA 3V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74LV4052ATPWREP
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 364
Description: 18ns, 18ns SP4T 100Ohm DUAL Analog Switches 74LV4052 16 Pins 1μA 3V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	61.887009mg
Operating Temperature	-40°C~105°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	100Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	74LV4052
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	2V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	20μA
Nominal Supply Current	20μA
Propagation Delay	8 ns
Turn On Delay Time	25 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Supply Type	Single
Bandwidth	50MHz
Turn-Off Delay Time	25 ns
On-State Resistance (Max)	100Ohm
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	45 dB
Current - Leakage (IS(off)) (Max)	1μA
On-state Resistance Match-Nom	30Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	18ns, 18ns
Channel-to-Channel Matching (ΔRon)	20 Ω (Max)
Crosstalk	-45dB @ 1MHz
Voltage - Supply, Single (V+)	2V~5.5V
Signal Current-Max	0.05A
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74LV4052ATPWREP Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. 4:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~105°C TA degrees Celsius. In total, there are 16 terminations. As a result of its 4 channels, this electronic component provides high-quality output. Powered by a 3V voltage supply, the electrical part should be switched on and run. This electrical component is included in the 16 series of products. On the other hand, analog switches can be constructed using SP4T switching circuits. The multiplexer consists of 2 circuits. Look for analog switch ic variants by searching with 74LV4052. Internally, this switch multiplexer has a resistance of 100Ohm. For details about the functions of 16 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. An effective Single supply digital multiplexer. 2V is the lowest voltage the electrical component should receive. For this digital switch to work, 20μA current would suffice. Analogue multiplexers require a 2V~5.5V voltage to drain from a single voltage supply. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. In order to operate the 8 inputs, there are several steps to follow. In 50MHz-bandwidths, data can be transferred.