SN74LV4053AD

14ns, 14ns SPDT 75Ohm DUAL Analog Switches 74LV4053 16 Pins 100nA 2.3V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74LV4053AD
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 627
Description: 14ns, 14ns SPDT 75Ohm DUAL Analog Switches 74LV4053 16 Pins 100nA 2.3V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Number of Pins	16
Weight	141.690917mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	75Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	2.3V
Base Part Number	74LV4053
Output	SEPARATE OUTPUT
Pin Count	16
Number of Channels	2
Number of Circuits	3
Max Supply Voltage	5.5V
Min Supply Voltage	2V
Operating Supply Current	20μA
Nominal Supply Current	20μA
Propagation Delay	12 ns
Turn On Delay Time	28 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	6
Supply Type	Single
Bandwidth	50MHz
Supply Current-Max (Isup)	0.04mA
Turn-Off Delay Time	28 ns
On-State Resistance (Max)	75Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	45 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.5pF 8.2pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	14ns, 14ns
Channel-to-Channel Matching (ΔRon)	1.3 Ω
Crosstalk	-45dB @ 1MHz
Voltage - Supply, Single (V+)	2V~5.5V
Drain to Source Resistance	500Ohm
Signal Current-Max	0.05A
Height	1.75mm
Length	9.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)

SN74LV4053AD Overview

The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tube is used. A switch device like this is mounted in Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there have been 16 terminations. A high-quality output is provided by the electrical component's 2 channels. When a voltage supply of 2.3V is used, the electronic component should be turned on and run. Electronic part bodies are injected with 16 pins. Based on SPDT switching circuits, these analog multiplexers work. It consists of 3 circuits. Try searching for 74LV4053 variants of the analog switch ic. The internal resistance of this digital multiplexer is 75Ohm. The functions of 16 pins can be found in the datasheets. Theswitch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Digital switch that provides Single power at a cost-effective price. A low voltage of 2V should be applied to the electronic component. For this digital switch to work, 20μA current would suffice. A voltage of 2V~5.5V is required to drain this analog switch from a single voltage supply. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. Operating 6 inputs is required. It is possible to transfer data over a 50MHz-bandwidth. Drain to Source resistance for this electronic component is 500Ohm.