Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Weight |
141.690917mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
75Ohm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
3 |
Supply Voltage |
2.3V |
Base Part Number |
74LV4053 |
Pin Count |
16 |
Polarity |
Non-Inverting |
Number of Channels |
2 |
Number of Circuits |
3 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2V |
Operating Supply Current |
20μA |
Nominal Supply Current |
20μA |
Propagation Delay |
12 ns |
Turn On Delay Time |
28 ns |
Logic Function |
Demultiplexer, Multiplexer |
Number of Inputs |
6 |
Supply Type |
Single |
Bandwidth |
50MHz |
Supply Current-Max (Isup) |
0.04mA |
Turn-Off Delay Time |
28 ns |
On-State Resistance (Max) |
75Ohm |
High Level Output Current |
25mA |
Low Level Output Current |
25mA |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
45 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
0.5pF 8.2pF |
On-state Resistance Match-Nom |
2Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
14ns, 14ns |
Channel-to-Channel Matching (ΔRon) |
1.3 Ω |
Crosstalk |
-45dB @ 1MHz |
Voltage - Supply, Single (V+) |
2V~5.5V |
Signal Current-Max |
0.05A |
Height |
1.75mm |
Length |
9.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74LV4053ADR Overview
This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. High reliability is ensured by the advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 2:1. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 16. A 2 channel electronic part produces high-quality output. Turning on and running the electrical part should be easy with a 2.3V voltage supply. As part of the design of the 16 series, this electronic part has been incorporated into the system. Unlike digital switches, these are based on SPDT switching circuits. It consists of 3 circuits. Try searching with 74LV4053 if you're looking for variants. As far as internal resistance is concerned, it has 75Ohm. You can find the functions of the 16 pins in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Analogue multiplexer with a Single supply type that is cost-effective. 2V is the lowest voltage the electrical component should receive. For this multiplexer to operate, 20μA current would be sufficient. Using only a single voltage supply, this analog switch requires 2V~5.5V voltage. Among the inputs that can be operated are the 6 inputs. It is possible to transfer data over a 50MHz-bandwidth.
SN74LV4053ADR Features
2 Channels
Switch Circuit: SPDT
20μA Supply Current
Bandwidth: 50MHz
SN74LV4053ADR Applications
There are a lot of Texas Instruments SN74LV4053ADR Analog Switches & Multiplexers ICs applications.
- PDAs
- Audio and video switching
- Sample-and-hold systems
- Residential Gateways, Home Gateway/Router
- PCMCIA cards
- Avionics and Military Systems
- Audio and video routing
- SONET/SDH ADM
- DSLAMs
- Relay replacements