Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Weight |
141.690917mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
75Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
3 |
Supply Voltage |
2.3V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74LV4053 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Number of Channels |
2 |
Number of Circuits |
3 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2V |
Operating Supply Current |
20μA |
Nominal Supply Current |
20μA |
Propagation Delay |
16 ns |
Turn On Delay Time |
28 ns |
Logic Function |
Demultiplexer, Multiplexer |
Number of Inputs |
6 |
Supply Type |
Single |
Bandwidth |
50MHz |
Supply Current-Max (Isup) |
0.04mA |
Turn-Off Delay Time |
28 ns |
On-State Resistance (Max) |
75Ohm |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
45 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
0.5pF 8.2pF |
On-state Resistance Match-Nom |
2Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
14ns, 14ns |
Channel-to-Channel Matching (ΔRon) |
1.3 Ω |
Crosstalk |
-45dB @ 1MHz |
Voltage - Supply, Single (V+) |
2V~5.5V |
Signal Current-Max |
0.05A |
Height |
1.75mm |
Length |
9.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74LV4053ADRG4 Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 2:1. Operation at a temperature around -40°C~85°C TA. Totally, there are 16 terminations. As a result of its 2 channels, this electronic component provides high-quality output. Powered by a 2.3V voltage supply, the electrical part should be switched on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. A SPDT switching circuit is used for these analog switches. Circuits number 3 make up this analogue multiplexer. Search with 74LV4053 if you are looking for analog multiplexer variants. There is 75Ohm internal resistance in this digital multiplexer. The functions of 16 pins can be found in the datasheets. This switch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. A analog switch ic that has a cost-effective Single supply type. The lowest voltage fed to the electronic component should be 2V. In order to operate this switch device, it would need a current of 20μA. This analogue multiplexer requires a voltage of 2V~5.5V when it drains from a single voltage supply. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. The 6 inputs need to be operated in order to work. In 50MHz-bandwidths, data can be transferred.
SN74LV4053ADRG4 Features
2 Channels
Switch Circuit: SPDT
20μA Supply Current
Bandwidth: 50MHz
SN74LV4053ADRG4 Applications
There are a lot of Texas Instruments SN74LV4053ADRG4 Analog Switches & Multiplexers ICs applications.
- HDTV
- Private Branch Exchange (PBX)
- Precision instrumentation
- Ultrasound
- Microprocessor Controlled Analog Systems
- Optical Applications
- Cable PC
- Communications systems
- ISDN NT1/TA
- Residential Gateways, Home Gateway/Router