SN74LV4053AN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Resistance | 75Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 3 |
| Supply Voltage | 2.3V |
| Base Part Number | 74LV4053 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Polarity | Non-Inverting |
| Number of Channels | 2 |
| Number of Circuits | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 20μA |
| Propagation Delay | 12 ns |
| Turn On Delay Time | 28 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 6 |
| Supply Type | Single |
| Bandwidth | 50MHz |
| Supply Current-Max (Isup) | 0.04mA |
| Turn-Off Delay Time | 28 ns |
| On-State Resistance (Max) | 75Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 45 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 0.5pF 8.2pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 14ns, 14ns |
| Channel-to-Channel Matching (ΔRon) | 1.3 Ω |
| Crosstalk | -45dB @ 1MHz |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Signal Current-Max | 0.05A |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV4053AN Overview
The electrical component comes in 16-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tube. Mounted in Through Hole is this multiplexer. Multiplexers and demultiplexers have the same number of circuits 2:1. Operating temperature extended to -40°C~85°C TA. There are 16 terminations totally. As a result of its 2 channels, this electronic component provides high-quality output. When the electronic component is given a voltage of 2.3V, it should be turned on and run. 16 pins are injected to the electronic part body. The analog switch ics are built using SPDT switching circuits. This multiplexer is composed of 3 circuits. Try searching for 74LV4053 variants of the analog switch ic. A 75Ohm internal resistance characterizes this multiplexer. Datasheets for 16 pin functions are available upon request. Theswitch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. A cost-effective Single supply type analogue multiplexer. 2V should be the lowest voltage fed to the electronic component. The analogue multiplexer could operate on 20μA current. Draining from a single voltage supply, this analog switch requires a voltage of 2V~5.5V. There are SEPARATE OUTPUT outputs on this analog switch ic. The electrical component supports 6 inputs. 50MHz-bandwidths can be used to transfer data between multiplexers.
SN74LV4053AN Features
2 Channels
Switch Circuit: SPDT
20μA Supply Current
Bandwidth: 50MHz
SN74LV4053AN Applications
There are a lot of Texas Instruments SN74LV4053AN Analog Switches & Multiplexers ICs applications.
- Precision instrumentation
- Battery Powered Systems
- Audio and video switching
- 65 V DACs
- Sample hold systems
- RGB switches
- DSUs
- Medical Instrumentation
- Digital Cross-Connects
- SDH/SONET multiplexers
