SN74LV4053APWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Resistance | 75Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 2.3V |
| Pin Count | 16 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 20μA |
| Number of Bits | 3 |
| Propagation Delay | 12 ns |
| Turn On Delay Time | 28 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 6 |
| Supply Type | Single |
| Bandwidth | 50MHz |
| Turn-Off Delay Time | 28 ns |
| Off-state Isolation-Nom | 45 dB |
| On-state Resistance Match-Nom | 2Ohm |
| Signal Current-Max | 0.05A |
| Height | 1.15mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LV4053APWG4 Overview
The electronic component is convenient to ship overseas because it is packed in a TSSOP. To ensure high reliability, a new packaging method Rail/Tube is used. There are 16 terminations totally. A 2 channel electronic part produces high-quality output. If the voltage supply is 2.3V volts, the electrical component should be turned on and run. The electrical component body receives 16 pins. It has an internal resistance of 75Ohm. Datasheets for functions of 16 pins are available. It is a typical Multiplexer or Switches analog multiplexer. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. Analogue multiplexer with a Single supply type that is cost-effective. The lowest voltage the electronic part should receive is 2V. The analogue multiplexer could operate on 20μA current. There are 6 inputs to be operated. There are 50MHz bandwidths for data transfer. Temperatures higher than 85°C are not recommended for operation of the analogue multiplexer. 3-bit conductivity is possible.
SN74LV4053APWG4 Features
2 Channels
20μA Supply Current
Bandwidth: 50MHz
3-Bit
SN74LV4053APWG4 Applications
There are a lot of Texas Instruments SN74LV4053APWG4 Analog Switches & Multiplexers ICs applications.
- Voice over IP/DSL – Integrated Access Devices, Smart
- RGB switches
- Industrial control systems
- PBXs
- Wireless Local Loop
- Fault Tolerant Systems
- Cross Connects
- E1 Network Equipment
- Transmit
- Intelligent PBX
