Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Weight |
61.887009mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
100Ohm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
3 |
Supply Voltage |
2.3V |
Base Part Number |
74LV4053 |
Pin Count |
16 |
Polarity |
Non-Inverting |
Number of Channels |
2 |
Number of Circuits |
3 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2V |
Operating Supply Current |
20μA |
Nominal Supply Current |
20μA |
Propagation Delay |
12 ns |
Turn On Delay Time |
28 ns |
Logic Function |
Demultiplexer, Multiplexer |
Number of Inputs |
6 |
Supply Type |
Single |
Bandwidth |
50MHz |
Supply Current-Max (Isup) |
0.04mA |
Turn-Off Delay Time |
28 ns |
On-State Resistance (Max) |
75Ohm |
High Level Output Current |
25mA |
Low Level Output Current |
25mA |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
45 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
0.5pF 8.2pF |
On-state Resistance Match-Nom |
2Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
14ns, 14ns |
Channel-to-Channel Matching (ΔRon) |
1.3 Ω |
Crosstalk |
-45dB @ 1MHz |
Voltage - Supply, Single (V+) |
2V~5.5V |
Drain to Source Resistance |
100Ohm |
Signal Current-Max |
0.05A |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74LV4053APWR Overview
Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. This packaging method provides high reliability because it uses advanced packaging techniques. There is an analog multiplexer mounted in position Surface Mount. 2:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -40°C~85°C TA. In total, 16 terminations have occurred. High-quality output is provided by the electronic component's 2 channels. A 2.3V voltage supply should turn on and run the electronic component. This electronic part can be found in the 16 series. SPDT switching circuits are used in these analog switch ics. A 3 circuit is present in this switch device. 74LV4053 can be used to search for analog multiplexer variants. There is 100Ohm internal resistance in this digital multiplexer. You can find the functions of the 16 pins in the datasheets. This switch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. Digital switch that provides Single power at a cost-effective price. 2V should be the lowest voltage fed to the electronic component. For this digital switch to work, 20μA current would suffice. This analogue multiplexer requires a voltage of 2V~5.5V when it drains from a single voltage supply. It is possible to operate 6 inputs. The data can be transferred over a wide range of bandwidths, called 50MHz bandwidths. There is 100Ohm Drain to Source resistance on this electronic part.
SN74LV4053APWR Features
2 Channels
Switch Circuit: SPDT
20μA Supply Current
Bandwidth: 50MHz
Drain-to-Source resistance: 100Ohm
SN74LV4053APWR Applications
There are a lot of Texas Instruments SN74LV4053APWR Analog Switches & Multiplexers ICs applications.
- Avionics test equipment
- Cellular phones
- Relay replacements
- Access Concentrators
- Fault Tolerant Systems
- Private Branch Exchange (PBX)
- Medical systems
- Data switching
- RGB switches
- Routers