SN74LV4053APWRG4

14ns, 14ns SPDT 75Ohm DUAL Analog Switches 74LV4053 16 Pins 100nA 2.3V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74LV4053APWRG4
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 912
Description: 14ns, 14ns SPDT 75Ohm DUAL Analog Switches 74LV4053 16 Pins 100nA 2.3V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	75Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	2.3V
Base Part Number	74LV4053
Output	SEPARATE OUTPUT
Pin Count	16
Number of Channels	2
Number of Circuits	3
Max Supply Voltage	5.5V
Min Supply Voltage	2V
Operating Supply Current	20μA
Nominal Supply Current	20μA
Propagation Delay	12 ns
Turn On Delay Time	28 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	6
Supply Type	Single
Bandwidth	50MHz
Supply Current-Max (Isup)	0.04mA
Turn-Off Delay Time	28 ns
On-State Resistance (Max)	75Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	45 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.5pF 8.2pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	14ns, 14ns
Channel-to-Channel Matching (ΔRon)	1.3 Ω
Crosstalk	-45dB @ 1MHz
Voltage - Supply, Single (V+)	2V~5.5V
Signal Current-Max	0.05A
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	61.887009mg

SN74LV4053APWRG4 Overview

The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. The operating temperature is extended to around -40°C~85°C TA. Totally, there are 16 terminations. By its 2 channels, the electronic component provides high-quality output. A 2.3V voltage supply should turn on and run the electronic component. 16 pins are injected to the electronic part body. A SPDT switching circuit is used for these analog switches. There are 3 circuits in this multiplexer. If you are looking for variants of the digital switch, trying search with 74LV4053. This digital multiplexer has 75Ohm internal resistance. Datasheets for 16 pin functions are available upon request. In this analog multiplexer, the value is Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Digital switch that provides Single power at a cost-effective price. There should be 2V voltage fed to the electrical part below 2V. The switch device would be able to operate with 20μA current. The voltage required by this switch device is 2V~5.5V, draining from a single voltage supply. There are SEPARATE OUTPUT outputs on this analog switch ic. It is possible to operate 6 inputs. 50MHz-bandwidths can be used to transfer data between multiplexers.