SN74LV4053AQPWRQ1
| Parameters | |
|---|---|
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 75Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV4053 |
| Output | SEPARATE OUTPUT |
| Qualification Status | Not Qualified |
| Number of Channels | 3 |
| Number of Circuits | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 20μA |
| Number of Bits | 2 |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 18 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Bandwidth | 50MHz |
| Turn-Off Delay Time | 18 ns |
| On-State Resistance (Max) | 75Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 0.5pF 8.2pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 14ns, 14ns |
| Channel-to-Channel Matching (ΔRon) | 1.3 Ω |
| Crosstalk | -45dB @ 1MHz |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Signal Current-Max | 0.05A |
| Height | 1.2mm |
SN74LV4053AQPWRQ1 Overview
This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. To ensure high reliability, a new packaging method Cut Tape (CT) is used. A switch device like this is mounted in Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -40°C~125°C TA extended. There are 16 terminations totally. By its 3 channels, the electronic component provides high-quality output. SPDT switching circuits are used in these analog switch ics. Circuits number 3 make up this analogue multiplexer. Using the 74LV4053 search parameter, you can discover variants of the switch. Analog switches have 75Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Users shouldn't supply more than 5.5V voltage to the switch device. Single supply type digital switch with a low cost. A low voltage of 2V should be applied to the electronic component. The analogue multiplexer could operate on 20μA current. The voltage required by this switch device is 2V~5.5V, draining from a single voltage supply. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. 50MHz bandwidths enable data to be transferred. The switch device is capable of conducting in a 2-bit mode. It belongs to the series Automotive, AEC-Q100.
SN74LV4053AQPWRQ1 Features
3 Channels
Switch Circuit: SPDT
20μA Supply Current
Bandwidth: 50MHz
2-Bit
SN74LV4053AQPWRQ1 Applications
There are a lot of Texas Instruments SN74LV4053AQPWRQ1 Analog Switches & Multiplexers ICs applications.
- Central office
- Signal routing between systems
- SDH
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Cellular phones
- Sample hold systems
- Cable Modem
- Communications systems
- Automatic test equipment
- Public switching systems
