Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-VFQFN Exposed Pad |
Number of Pins |
16 |
Weight |
37.194574mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Cut Tape (CT) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
75Ohm |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
3 |
Supply Voltage |
2.3V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74LV4053 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Polarity |
Non-Inverting |
Number of Channels |
2 |
Number of Circuits |
3 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2V |
Operating Supply Current |
20μA |
Nominal Supply Current |
20μA |
Propagation Delay |
12 ns |
Turn On Delay Time |
28 ns |
Logic Function |
Demultiplexer, Multiplexer |
Number of Inputs |
6 |
Supply Type |
Single |
Bandwidth |
50MHz |
Supply Current-Max (Isup) |
0.04mA |
Turn-Off Delay Time |
28 ns |
On-State Resistance (Max) |
75Ohm |
High Level Output Current |
25mA |
Low Level Output Current |
25mA |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
45 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
0.5pF 8.2pF |
On-state Resistance Match-Nom |
2Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
14ns, 14ns |
Channel-to-Channel Matching (ΔRon) |
1.3 Ω |
Crosstalk |
-45dB @ 1MHz |
Voltage - Supply, Single (V+) |
2V~5.5V |
Signal Current-Max |
0.05A |
Height |
1mm |
Length |
4mm |
Width |
3.5mm |
Thickness |
900μm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74LV4053ARGYR Overview
Packed in 16-VFQFN Exposed Pad, the electronic component is convenient for shipping overseas. Advanced packaging method Cut Tape (CT) is used to provide high reliability. The multiplexer is located in Surface Mount. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operating temperature around -40°C~85°C TA extended. There are 16 terminations totally. This electronic part offers high-quality output due to its 2 channels. With a 2.3V voltage supply, the electrical component should be turned on and run. A total of 16 pins are injected into the electrical part body. A SPDT switching circuit is used to build these analog multiplexers. There are 3 circuits in this switch device. Try searching for the analog switch ic with 74LV4053 if you are looking for variants. In this multiplexer, the internal resistance is 75Ohm. Datasheets for 16 pin functions are available upon request. Multiplexer or Switches is a typical switch device. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Analogue multiplexer with a Single supply type that is cost-effective. The lowest voltage fed to the electronic component should be 2V. An operating current of 20μA would be sufficient for this switch device. An analogue multiplexer drains from a single voltage supply at 2V~5.5V. Operating 6 inputs is required. There are various bandwidths available for data transfer.
SN74LV4053ARGYR Features
2 Channels
Switch Circuit: SPDT
20μA Supply Current
Bandwidth: 50MHz
SN74LV4053ARGYR Applications
There are a lot of Texas Instruments SN74LV4053ARGYR Analog Switches & Multiplexers ICs applications.
- DVD-R
- Industrial
- Cell phones
- CSU
- Channelized and Unchannelized DS3 applications
- Data switching
- Communication systems
- Voice over IP/DSL – Integrated Access Devices, Smart
- Cable PC
- ISDN NT1/TA