SN74LV4066AD

12ns, 12ns SPST - NO 75Ohm DUAL Analog Switches MAKE-BEFORE-BREAK 74LV4066 14 Pins 100nA 2.3V 14-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74LV4066AD
Package: 14-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 980
Description: 12ns, 12ns SPST - NO 75Ohm DUAL Analog Switches MAKE-BEFORE-BREAK 74LV4066 14 Pins 100nA 2.3V 14-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Supply Type	Single
Bandwidth	50MHz
Turn-Off Delay Time	16 ns
On-State Resistance (Max)	75Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	40 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.5pF 5.5pF
On-state Resistance Match-Nom	6Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	12ns, 12ns
Channel-to-Channel Matching (ΔRon)	2 Ω
Crosstalk	-45dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Switch-on Time-Max	25ns
Switch-off Time-Max	25ns
Voltage - Supply, Single (V+)	2V~5.5V
Normal Position	NO
Height	1.75mm
Length	8.65mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Number of Pins	14
Weight	129.387224mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Resistance	75Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	2.3V
Terminal Pitch	1.27mm
Base Part Number	74LV4066
Output	SEPARATE OUTPUT
Pin Count	14
Power Supplies	2.5/5V
Number of Channels	4
Max Supply Voltage	5.5V
Min Supply Voltage	2V
Operating Supply Current	20μA
Max Supply Current	20μA
Throw Configuration	SPST
Propagation Delay	10 ns
Turn On Delay Time	16 ns
Input Voltage (Min)	2V

SN74LV4066AD Overview

The electronic part can be shipped overseas conveniently because it is packaged in 14-SOIC (0.154, 3.90mm Width). High reliability is achieved by using advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Operating temperature around -40°C~85°C TA extended. 14 terminations have been made so far. The electronic part provides high-quality output because it has 4 channels. If the voltage supply is 2.3V volts, the electrical component should be turned on and run. Electronic part bodies are injected with 14 pins. The analog switch ics are built using SPST - NO switching circuits. Look for analog switch ic variants by searching with 74LV4066. Analog switches have 75Ohm internal resistance. Please refer to the datasheets for 14 pins functions. There is Multiplexer or Switches analog multiplexer like this in the world. normally, users should not supply switches with voltages higher than 5.5V. Analogue multiplexers of the Single supply type that are cost-effective. It is recommended that the electrical component receives a voltage of 2V. The switch device would be able to operate with 20μA current. A voltage of 2V~5.5V is required for this switch device, which drains from a single voltage source. A digital multiplexer may suffer damage if voltage is applied above 20μA. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. This switch operates within the bandwidth of 50MHz.