SN74LV4066ADRE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 75Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Power Supplies | 2.5/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 20μA |
| Max Supply Current | 20μA |
| Throw Configuration | SPST |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 25 ns |
| Input Voltage (Min) | 2V |
| Number of Inputs | 4 |
| Supply Type | Single |
| Turn-Off Delay Time | 25 ns |
| Off-state Isolation-Nom | 40 dB |
| On-state Resistance Match-Nom | 6Ohm |
| Switching | MAKE-BEFORE-BREAK |
| Normal Position | NO |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LV4066ADRE4 Overview
Due to its SOIC packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tape and Reel. Total terminations are 14. This electronic part offers high-quality output due to its 4 channels. Turning on and running the electrical part should be easy with a 2.3V voltage supply. As part of the design of the 14 series, this electronic part has been incorporated into the system. It has an internal resistance of 75Ohm. Datasheets for functions of 14 pins are available. In this analog multiplexer, the value is Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Analogue multiplexer with a Single supply type that is cost-effective. A low voltage of 2V should be applied to the electronic component. For this digital switch to work, 20μA current would suffice. It may damage the digital multiplexer if the voltage is higher than 20μA. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. In order to operate the 4 inputs, there are several steps to follow. The switches should not operate in an environment where the temperature is higher than 85°C.
SN74LV4066ADRE4 Features
4 Channels
20μA Supply Current
SN74LV4066ADRE4 Applications
There are a lot of Texas Instruments SN74LV4066ADRE4 Analog Switches & Multiplexers ICs applications.
- Multiplexers
- Communications systems
- SDH
- E1 Network Equipment
- Industrial and process control systems
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- PBX interfaces
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- HDTV
- Avionics and Military Systems
