Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
14-DIP (0.300, 7.62mm) |
Number of Pins |
14 |
Weight |
927.99329mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Resistance |
75Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Number of Functions |
4 |
Supply Voltage |
2.3V |
Base Part Number |
74LV4066 |
Output |
SEPARATE OUTPUT |
Pin Count |
14 |
Polarity |
Non-Inverting |
Power Supplies |
2.5/5V |
Number of Channels |
4 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2V |
Operating Supply Current |
20μA |
Max Supply Current |
20μA |
Throw Configuration |
SPST |
Propagation Delay |
10 ns |
Turn On Delay Time |
16 ns |
Input Voltage (Min) |
2V |
Supply Type |
Single |
Bandwidth |
50MHz |
Turn-Off Delay Time |
16 ns |
On-State Resistance (Max) |
75Ohm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
40 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
0.5pF 5.5pF |
On-state Resistance Match-Nom |
6Ohm |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
12ns, 12ns |
Channel-to-Channel Matching (ΔRon) |
2 Ω |
Crosstalk |
-45dB @ 1MHz |
Switching |
MAKE-BEFORE-BREAK |
Switch-on Time-Max |
25ns |
Switch-off Time-Max |
25ns |
Voltage - Supply, Single (V+) |
2V~5.5V |
Normal Position |
NO |
Height |
5.08mm |
Length |
19.3mm |
Width |
6.35mm |
Thickness |
3.9mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74LV4066AN Overview
Shipping overseas is convenient due to the electrical component's packing in 14-DIP (0.300, 7.62mm). High reliability is achieved by using advanced packaging method Tube. A switch device like this is mounted in Through Hole. Multiplexers and demultiplexers have a ratio of 1:1. Extended operating temperature around -40°C~85°C TA. The total number of terminations is 14. A high-quality output is provided by the electrical component's 4 channels. With a 2.3V voltage supply, the electrical component should be turned on and run. An electrical component of this type can be found in the 14 series. Based on SPST - NO switching circuits, these analog multiplexers work. If you are looking for variants of the digital switch, trying search with 74LV4066. Analog switches have 75Ohm internal resistance. Please refer to the datasheets for 14 pins functions. There is Multiplexer or Switches analog multiplexer like this in the world. Users should never supply a voltage higher than 5.5V to a switch device. A analog switch ic that has a cost-effective Single supply type. The lowest voltage the electronic part should receive is 2V. 20μA current would be enough for this multiplexer to operate. Analogue multiplexers require a 2V~5.5V voltage to drain from a single voltage supply. If put voltage greater than 20μA on the device, damage may be caused to the analogue multiplexer. There are SEPARATE OUTPUT outputs on this analog switch ic. 50MHz bandwidths enable data to be transferred.
SN74LV4066AN Features
4 Channels
Switch Circuit: SPST - NO
20μA Supply Current
Bandwidth: 50MHz
SN74LV4066AN Applications
There are a lot of Texas Instruments SN74LV4066AN Analog Switches & Multiplexers ICs applications.
- Communication systems
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Power routing
- Precision instrumentation
- Optical Applications
- Cross Connects
- Industrial
- Video signal routing
- Communications systems
- Precision data acquisition