SN74LV4066APWRG4

12ns, 12ns SPST - NO 75Ohm DUAL Analog Switches MAKE-BEFORE-BREAK 74LV4066 14 Pins 100nA 2.3V 14-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74LV4066APWRG4
Package: 14-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 649
Description: 12ns, 12ns SPST - NO 75Ohm DUAL Analog Switches MAKE-BEFORE-BREAK 74LV4066 14 Pins 100nA 2.3V 14-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Number of Pins	14
Weight	57.209338mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Resistance	75Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	2.3V
Base Part Number	74LV4066
Output	SEPARATE OUTPUT
Pin Count	14
Power Supplies	2.5/5V
Number of Channels	4
Max Supply Voltage	5.5V
Min Supply Voltage	2V
Operating Supply Current	20μA
Max Supply Current	20μA
Throw Configuration	SPST
Propagation Delay	10 ns
Turn On Delay Time	25 ns
Supply Type	Single
Bandwidth	50MHz
Turn-Off Delay Time	25 ns
On-State Resistance (Max)	75Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	40 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.5pF 5.5pF
On-state Resistance Match-Nom	6Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	12ns, 12ns
Channel-to-Channel Matching (ΔRon)	2 Ω
Crosstalk	-45dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Voltage - Supply, Single (V+)	2V~5.5V
Normal Position	NO
Height	1.15mm
Length	5mm
Width	4.4mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74LV4066APWRG4 Overview

The electronic component is convenient to ship overseas because it is packed in a 14-TSSOP (0.173, 4.40mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operation at a temperature around -40°C~85°C TA. Total terminations are 14. As a result of its 4 channels, this electronic component provides high-quality output. In the case of a voltage supply of 2.3V volts, the electrical part can be powered up and run. As part of the design of the 14 series, this electronic part has been incorporated into the system. The analog switch ics are built using SPST - NO switching circuits. 74LV4066 can be used to search for analog multiplexer variants. This digital multiplexer has 75Ohm internal resistance. To find out what the 14 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Analog switch ics with Single supply type are cost-effective. 2V should be the lowest voltage fed to the electronic component. This digital switch can be operated with a current of 20μA. A voltage of 2V~5.5V is required to drain this analog switch from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 20μA. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. A 50MHz-bandwidth can be used for data transfer.