SN74LV4066ARGYR

12ns, 12ns SPST - NO 75Ohm QUAD Analog Switches MAKE-BEFORE-BREAK 74LV4066 14 Pins 100nA 2.3V 14-VFQFN Exposed Pad

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74LV4066ARGYR
Package: 14-VFQFN Exposed Pad
Datasheet: -
Stock: 724
Description: 12ns, 12ns SPST - NO 75Ohm QUAD Analog Switches MAKE-BEFORE-BREAK 74LV4066 14 Pins 100nA 2.3V 14-VFQFN Exposed Pad(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-VFQFN Exposed Pad
Number of Pins	14
Weight	32.205058mg
Operating Temperature	-40°C~85°C TA
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	14
ECCN Code	EAR99
Resistance	75Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	2.3V
Terminal Pitch	0.5mm
Base Part Number	74LV4066
Output	SEPARATE OUTPUT
Pin Count	14
Polarity	Non-Inverting
Power Supplies	2.5/5V
Number of Channels	4
Max Supply Voltage	5.5V
Min Supply Voltage	2V
Operating Supply Current	20μA
Max Supply Current	20μA
Throw Configuration	SPST
Propagation Delay	10 ns
Turn On Delay Time	25 ns
Input Voltage (Min)	2V
Supply Type	Single
Bandwidth	50MHz
Turn-Off Delay Time	25 ns
On-State Resistance (Max)	75Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	40 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.5pF 5.5pF
On-state Resistance Match-Nom	6Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	12ns, 12ns
Channel-to-Channel Matching (ΔRon)	2 Ω
Crosstalk	-45dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Voltage - Supply, Single (V+)	2V~5.5V
Normal Position	NO
Height	1mm
Length	3.5mm
Width	3.5mm
Thickness	900μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74LV4066ARGYR Overview

The electrical component comes in 14-VFQFN Exposed Pad packaging, which makes it convenient to ship overseas. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 1:1. Around -40°C~85°C TA is the extended operating temperature. The total number of terminations is 14. The electronic part delivers high-quality output through its 4 channels. A 2.3V voltage supply should turn on and run the electronic component. A total of 14 pins are injected into the electrical part body. Based on SPST - NO switching circuits, these analog multiplexers work. Try searching with 74LV4066 if you're looking for variants. Internally, this switch multiplexer has a resistance of 75Ohm. The datasheets for the 14 pins explain the functions. A analogue multiplexer of this type is a Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. The analog switch ic is of the Single supply type and is cost-effective. 2V is the lowest voltage the electrical component should receive. 20μA current would be enough for this multiplexer to operate. This analog switch requires a voltage of 2V~5.5V to drain from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 20μA. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. A 50MHz-bandwidth can be used for data transfer.