banner_page

SN74LV573ADBRG4

D-Type, Latch 2V~5.5V 8 Bits Tri-State Latches 74LV Series 74LV573 20 Pins DUAL CMOS 20-SSOP (0.209, 5.30mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74LV573ADBRG4
  • Package: 20-SSOP (0.209, 5.30mm Width)
  • Datasheet: -
  • Stock: 512
  • Description: D-Type, Latch 2V~5.5V 8 Bits Tri-State Latches 74LV Series 74LV573 20 Pins DUAL CMOS 20-SSOP (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Series 74LV
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Voltage - Supply 2V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.5V
Terminal Pitch 0.65mm
Base Part Number 74LV573
Pin Count 20
Output Type Tri-State
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 3.3V
Supply Voltage-Min (Vsup) 2V
Load Capacitance 50pF
Number of Ports 2
Output Current 16mA
Number of Bits 8
Propagation Delay 23 ns
Turn On Delay Time 1 ns
Family LV/LV-A/LVX/H
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 16mA 16mA
Logic Type D-Type Transparent Latch
Control Type ENABLE LOW
Power Supply Current-Max (ICC) 0.02mA
Number of Input Lines 8
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 2mm
Length 7.2mm
Width 5.3mm
Thickness 1.95mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SSOP (0.209, 5.30mm Width)
Number of Pins 20
Weight 156.687814mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)

SN74LV573ADBRG4 Overview


Package 20-SSOP (0.209, 5.30mm Width) includes it. Packaged in the way of Tape & Reel (TR). Tri-State is used for the output it is configured with. This electrical device has the logic type D-Type Transparent Latch. Surface Mount is used to mount this electronic part. There is no supply voltage for this device. It is -40°C~85°C at the operating temperature. The 74LV series is associated with this FPGA. With this electronic part, there are 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. This type belongs to the 74LV573 family. The device is operated when the supply voltage is set to 2.5V. The device is equipped with 20 pins. LV/LV-A/LVX/H is the family of this electronic device. The pin configuration of the device is 20. This electronic part is mounted in the way of Surface Mount. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In the subcategory FF/Latches, this part belongs. When Vsup reaches 5.5V, the maximal supply voltage is reached. A total of 3.3V power supplies are required for it to operate. Ensure that the supply voltage (Vsup) is greater than 2V. There are 8 input lines in which electronic circuits are present. On the basis of its reliability, this device is well suited for TR. It features maximum flexibility in design due to 16mA output current. Maximum power supply (ICC) for its operation is 0.02mA.

SN74LV573ADBRG4 Features


20-SSOP (0.209, 5.30mm Width) package
74LV series
8 Bits
74LV573 family
20 pin count
20 pins
3.3V power supplies

SN74LV573ADBRG4 Applications


There are a lot of Texas Instruments SN74LV573ADBRG4 Latches applications.

  • Stacked or Push-Down Registers
  • Up/down difference counting
  • Hammer Device Information
  • TV Set-top Boxes
  • Programmable binary
  • Four-bit storage with output enable
  • Parallel Input
  • Shift Registers
  • Automotive Infotainment
  • BCD counting

Write a review

Note: HTML is not translated!
    Bad           Good