SN74LV573ADGVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 60.186038mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV573 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 1 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV573ADGVR Overview
20-TFSOP (0.173, 4.40mm Width) contains it. The package is in the form of Tape & Reel (TR). There is a Tri-State output configured. The Logic type of this electrical device is D-Type Transparent Latch. The way in which this electronic part is mounted is Surface Mount. There is no supply voltage for this device. There is a temperature of -40°C~85°C at which the system operates. There are a number of FPGAs in this series, including this one. The design of this electronic part is based on 8 bits. This device is designed with 20 terminations. 74LV573 is the family name of it. With the supply voltage set at 2.5V, it is able to operate. The 20 pind are equipped with it. It is a member of the LV/LV-A/LVX/H family of electronic devices. 20 pins are used in its design. Surface Mount is the method used for mounting this electronic part. As far as ports are concerned, this device has 2 ports. The part belongs to the FF/Latches subcategory. It reaches a maximum supply voltage (Vsup) of 5.5V. It operates from 3.3V power supplies. It is recommended to have a higher supply voltage (Vsup) than 2V. An electronic circuit can be found on 8 input lines. Based on its reliable performance, this device is suitable for TR. Its output current of 16mA ensures maximum design flexibility. In addition to that, it is also characterized by BROADSIDE VERSION OF 373. As its maximal power current (ICC) reaches 0.02mA, it is able to operate.
SN74LV573ADGVR Features
20-TFSOP (0.173, 4.40mm Width) package
74LV series
8 Bits
74LV573 family
20 pin count
20 pins
3.3V power supplies
SN74LV573ADGVR Applications
There are a lot of Texas Instruments SN74LV573ADGVR Latches applications.
- Timers
- Hammer Device Information
- Sample and hold register
- Watches
- Counter
- Counter control
- Counting
- Decade counting 7-segment decimal display
- Pattern Generators
- Bus system register with enable parallel lines at bus side
