SN74LV573ADWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Base Part Number | 74LV573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Propagation Delay | 23 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 1 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Number of Input Lines | 2 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV573ADWR Overview
Package 20-SOIC (0.295, 7.50mm Width) includes it. Tape & Reel (TR) is the way it is packaged. Tri-State is used for the output it is configured with. D-Type Transparent Latch is the logic type of this electrical device. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~5.5V. There is -40°C~85°C operating temperature. The 74LV series contains FPGAs of this type. There are 8 bits in this electronic part. In this device, there are 20 terminations that have been designed. As a member of the 74LV573 family, it falls under that category. In order to operate it, the supply voltage must be 2.5V. There are 20 pins attached to it. In terms of electronic devices, this one is in the LV/LV-A/LVX/H family. The pin configuration of the device is 20. It is mounted according to the Surface Mount method. This device has a total of 2 ports. In the subcategory FF/Latches, this part belongs. It is possible to reach 5.5V when the maximum supply voltage (Vsup) has been reached. There is 3.3V power supply for it. There should be a voltage supply (Vsup) greater than 2V. In the circuit, there are 2 input lines that are constituted by an electronic circuit. Based on its reliable performance, this device is well suited to TR. With 16mA, maximum design flexibility is ensured. The current consumed by the device is 20μA volts in quiescent mode, which cannot be affected by external factors. The superior flexibility of this circuit can be attributed to the use of 8 circuits. It is also characterized by BROADSIDE VERSION OF 373.
SN74LV573ADWR Features
20-SOIC (0.295, 7.50mm Width) package
74LV series
8 Bits
74LV573 family
20 pin count
20 pins
3.3V power supplies
SN74LV573ADWR Applications
There are a lot of Texas Instruments SN74LV573ADWR Latches applications.
- Counter timers
- Display driver
- Sample and hold register
- Serial Output Register
- Shift Registers
- Multistage ripple counting
- Serial Input
- Watches
- Control circuits
- Accumulator Registers
