SN74LV573AGQNR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFBGA |
| Number of Pins | 20 |
| Weight | 21.687385mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74LV |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LV573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 1 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 2 |
| Independent Circuits | 1 |
| Length | 4mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LV573AGQNR Overview
It is embedded in the 20-VFBGA package. Cut Tape (CT) is the packaging method. There is a Tri-State output configured. There is a logic type of D-Type Transparent Latch for this electrical device. Electronic components are mounted using the Surface Mount method. The voltage supply is 2V~5.5V. The temperature at which the machine is operating is -40°C~85°C. The 74LV series of FPGAs is the one this FPGA belongs to. An electronic part with 8 bits is designed. This device has 20 terminations. This type belongs to the 74LV573 family. The supply voltage of the device is 2.5V. The 20 pind are equipped with it. LV/LV-A/LVX/H is the family of this electronic device. With the design of the board, there are only 20 pins. Surface Mount is the method used for mounting this electronic part. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Subcategory FF/Latches contains this part. 5.5V is the maximum voltage (Vsup) that can be supplied. There are 3.3V power supplies attached to it. The supply voltage (Vsup) should be greater than 2V. An electronic circuit can be found on 2 input lines. Its reliable performance makes it an excellent choice for TAPE AND REEL. Its superior flexibility is achieved by using 8 circuits.
SN74LV573AGQNR Features
20-VFBGA package
74LV series
8 Bits
74LV573 family
20 pin count
20 pins
3.3V power supplies
SN74LV573AGQNR Applications
There are a lot of Texas Instruments SN74LV573AGQNR Latches applications.
- Address register
- Pattern generators
- Clocks
- Parallel-to-Serial Data Conversion
- A/D and D/A conversion
- Motor Drives
- Buffer Storage
- Frequency dividing
- Parallel Input
- Serial Output Register
