SN74LV573APW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LV573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Propagation Delay | 23 ns |
| Turn On Delay Time | 1 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV573APW Overview
There is an embedded version of it in package 20-TSSOP (0.173, 4.40mm Width). This package has the format of Tube. It uses Tri-State as the output. There is a logic type of D-Type Transparent Latch associated with this electrical device. Mounting this electronic component follows the Surface Mount method. A 2V~5.5V supply voltage is required to operate it. It operates at -40°C~85°C degrees Celsius. The 74LV series contains FPGAs of this type. This electronic part is designed with 8 Bits. The device consists of 20 terminations that are designed to be used in conjunction with it. The family 74LV573 includes it. The supply voltage of the device is 2.5V. 20 pins are available on it. LV/LV-A/LVX/H is the family name of this electronic device. This board has 20 pins on it, which is what it is designed for. The electronic part is mounted in a way that corresponds to Surface Mount. 2 ports are available on this device. In the subcategory FF/Latches, this part belongs. It reaches a maximum supply voltage (Vsup) of 5.5V. It operates from 3.3V power supplies. Ensure that the supply voltage (Vsup) is greater than 2V. Electronic circuits comprise 8 input lines. With an output current of 16mA, it is highly flexible in terms of design. When the maximum power current (ICC) is supplied for its operation, it reaches 0.02mA.
SN74LV573APW Features
20-TSSOP (0.173, 4.40mm Width) package
74LV series
8 Bits
74LV573 family
20 pin count
20 pins
3.3V power supplies
SN74LV573APW Applications
There are a lot of Texas Instruments SN74LV573APW Latches applications.
- Serial Input
- Double bus register system
- Communication systems
- Counter timers
- Automatic test equipment
- Automotive Cluster
- Parallel Input
- Four-bit storage with output enable
- Data acquisition
- Stacked or Push-Down Registers
