banner_page

SN74LV573APWG4

D-Type, Latch 8 Bits Latches 20 Pins DUAL CMOS TSSOP


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74LV573APWG4
  • Package: TSSOP
  • Datasheet: -
  • Stock: 645
  • Description: D-Type, Latch 8 Bits Latches 20 Pins DUAL CMOS TSSOP(Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case TSSOP
Number of Pins 20
Weight 76.997305mg
Packaging Rail/Tube
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory FF/Latches
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.5V
Terminal Pitch 0.65mm
Pin Count 20
Polarity Non-Inverting
Power Supplies 3.3V
Temperature Grade INDUSTRIAL
Number of Circuits 8
Max Supply Voltage 5.5V
Min Supply Voltage 2V
Load Capacitance 50pF
Number of Ports 2
Current - Output 16mA
Number of Bits 8
Propagation Delay 23 ns
Turn On Delay Time 1 ns
Family LV/LV-A/LVX/H
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
High Level Output Current -16mA
Low Level Output Current 16mA
Independent Circuits 1
Length 6.5mm
Width 4.4mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

SN74LV573APWG4 Overview


The package in which it is embedded is named TSSOP. As a result, it has a packaging of Rail/Tube. The design of this electronic part is based on 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In order to operate it, the supply voltage must be 2.5V. It is equipped with 20 pin count. In the world of electronics, this electronic device belongs to the family of LV/LV-A/LVX/H. Designed with 20 pins, it is compatible with a wide range of devices. Mounting this electronic component follows the Surface Mount method. This device is equipped with 2 ports. It belongs to the subcategory of FF/Latches. There are 3.3V power supplies required for this machine to operate. 8 circuits are used to provide this superior level of flexibility. There is 16mA output current at the low level. It has been set to -16mA for the high level output current. A temperature below 85°C should be used for operation. A temperature greater than -40°C should be used for operation. There is a maximum supply voltage of 5.5V supported by this device. This device requires a minimum voltage of 2V. A logic IC that is used in this application is BUS DRIVER. As the output current is 16mA, the design flexibility is maximum.

SN74LV573APWG4 Features


TSSOP package
8 Bits
20 pin count
20 pins
3.3V power supplies

SN74LV573APWG4 Applications


There are a lot of Texas Instruments SN74LV573APWG4 Latches applications.

  • Watches
  • Automotive HEV/EV Powertrain
  • Synchronous frequency dividers
  • Shift Registers
  • Counter timers
  • Hammer
  • Buffer Storage
  • Up-Down Johnson
  • Digital bus buffer
  • Serial Output Data Queuing

Write a review

Note: HTML is not translated!
    Bad           Good