SN74LV573APWRE4
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LV573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Propagation Delay | 23 ns |
| Turn On Delay Time | 1 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
SN74LV573APWRE4 Overview
The 20-TSSOP (0.173, 4.40mm Width) package contains it. It is packaged in the way of Tape & Reel (TR). It uses Tri-State as the output. The Logic type of this electrical device is D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. It operates at a voltage of 2V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. The 74LV series of FPGAs is the one this FPGA belongs to. The design of this electronic part contains 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. The family in which it belongs to is 74LV573. In order to operate it, the supply voltage must be 2.5V. 20 pins are provided. LV/LV-A/LVX/H is the family of this electronic device. Designed with 20 pins, it is compatible with a wide range of devices. Mounting this electronic component follows the Surface Mount method. This device has 2 ports on board, which are all available at the same time. In the subcategory FF/Latches, this part belongs. 5.5V is the maximum supply voltage (Vsup). There is 3.3V power supply for it. A voltage greater than 2V must be supplied as a power supply (Vsup). It consists of 8 input lines from which an electronic circuit can be built. As a result of its reliable performance, it is well suited for TR. Its 16mA output current allows for maximum design flexibility. A maximal power current (ICC) is generated for its operation at 0.02mA.
SN74LV573APWRE4 Features
20-TSSOP (0.173, 4.40mm Width) package
74LV series
8 Bits
74LV573 family
20 pin count
20 pins
3.3V power supplies
SN74LV573APWRE4 Applications
There are a lot of Texas Instruments SN74LV573APWRE4 Latches applications.
- Clocks
- Four-bit storage with output enable
- Avionics
- Serial Output Data Queuing
- Counting
- Digital bus buffer
- Parallel Input
- Counter control
- Hammer Device Information
- Shift register
