SN74LV573APWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LV573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Propagation Delay | 23 ns |
| Turn On Delay Time | 1 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV573APWRG4 Overview
In the 20-TSSOP (0.173, 4.40mm Width) package, it can be found as an embedded module. A package of Tape & Reel (TR) has been used. There is a Tri-State output configured. The Logic type of this electrical device is D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. It operates with a supply voltage of 2V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. The 74LV series is associated with this FPGA. There are 8 bits in this electronic part. This device has been designed with 20 terminations available. The family it belongs to is 74LV573. The supply voltage of the device is 2.5V. 20 pins are available on it. LV/LV-A/LVX/H is the family of this electronic device. The pin configuration of the device is 20. The electronic part is mounted in a way that corresponds to Surface Mount. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Subcategory FF/Latches includes this part. During this period, the maximum supply voltage (Vsup) reaches 5.5V. A total of 3.3V power supplies are required for it to operate. It is recommended to have a higher supply voltage (Vsup) than 2V. There are electronic circuits attached to the 8 input lines. Its reliable performance makes it an excellent choice for TR. Its 16mA output current allows for maximum design flexibility. A maximal power current (ICC) is generated for its operation at 0.02mA.
SN74LV573APWRG4 Features
20-TSSOP (0.173, 4.40mm Width) package
74LV series
8 Bits
74LV573 family
20 pin count
20 pins
3.3V power supplies
SN74LV573APWRG4 Applications
There are a lot of Texas Instruments SN74LV573APWRG4 Latches applications.
- Parallel Input
- Shift right with parallel loading
- Storage
- Automotive HEV/EV Powertrain
- Decade counting 7-segment decimal display
- High-speed logic
- Network Switches
- Registers
- Audio and video switching
- Buffer/Storage Registers
