banner_page

SN74LV573APWT

D-Type, Latch 2V~5.5V 8 Bits Tri-State Latches 74LV Series 74LV573 20 Pins DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74LV573APWT
  • Package: 20-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 986
  • Description: D-Type, Latch 2V~5.5V 8 Bits Tri-State Latches 74LV Series 74LV573 20 Pins DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-TSSOP (0.173, 4.40mm Width)
Number of Pins 20
Weight 76.997305mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74LV
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Termination SMD/SMT
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Voltage - Supply 2V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.5V
Terminal Pitch 0.65mm
Frequency 10MHz
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 74LV573
Pin Count 20
Qualification Status Not Qualified
Output Type Tri-State
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 3.3V
Supply Voltage-Min (Vsup) 2V
Load Capacitance 50pF
Number of Ports 2
Output Current 16mA
Number of Bits 8
Propagation Delay 8.8 ns
Turn On Delay Time 1 ns
Family LV/LV-A/LVX/H
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 16mA 16mA
Logic Type D-Type Transparent Latch
Control Type ENABLE LOW
Power Supply Current-Max (ICC) 0.02mA
Number of Input Lines 8
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 1.2mm
Length 6.5mm
Width 4.4mm
Thickness 1mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74LV573APWT Overview


Package 20-TSSOP (0.173, 4.40mm Width) includes it. It is packaged in the way of Tape & Reel (TR). Tri-State is the output configured for it. There is a logic type of D-Type Transparent Latch associated with this electrical device. According to Surface Mount, this electronic part is mounted. With a supply voltage of 2V~5.5V, it operates. During operation, the temperature is set at -40°C~85°C. The 74LV series contains FPGAs of this type. The electronic part in this image has 8 bits. This device is designed with 20 terminations. 74LV573 is the family name of it. In order to operate it, the supply voltage must be 2.5V. There are 20 pins on it. In terms of electronic devices, this one is in the LV/LV-A/LVX/H family. This board has 20 pins on it, which is what it is designed for. Surface Mount is used to mount this electronic part. This device is equipped with 2 ports. This part is included in FF/Latches. 5.5V is the maximum voltage (Vsup) that can be supplied. A total of 3.3V power supplies are needed to run it. If the supply voltage (Vsup) is greater than 2V, then the device is working correctly. Electronic circuits comprise 8 input lines. The device's reliable performance makes it a good choice for TR. As the output current is 16mA, the design flexibility is maximum. A maximal power current (ICC) is generated for its operation at 0.02mA.

SN74LV573APWT Features


20-TSSOP (0.173, 4.40mm Width) package
74LV series
8 Bits
74LV573 family
20 pin count
20 pins
3.3V power supplies

SN74LV573APWT Applications


There are a lot of Texas Instruments SN74LV573APWT Latches applications.

  • OC-48 communication systems
  • Sample and hold register
  • Four-bit storage with output enable
  • Serial Input
  • Avionics
  • Display driver
  • Counter control
  • Motor Drives
  • Programmable binary
  • Hammer Device Information

Write a review

Note: HTML is not translated!
    Bad           Good