SN74LV573ARGYR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Weight | 43.006227mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV573 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 1 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Number of Input Lines | 2 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1mm |
| Length | 4.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV573ARGYR Overview
In the 20-VFQFN Exposed Pad package, it can be found as an embedded module. Cut Tape (CT) is the way it is packaged. It uses Tri-State as the output. This electrical device has Logic type D-Type Transparent Latch. Surface Mount is used to mount this electronic part. The supply voltage of the device is 2V~5.5V. The temperature at which the machine is operating is -40°C~85°C. There are a number of FPGAs in this series, including this one. It is designed with 8 bits. This device is designed with 20 terminations. It belongs to 74LV573 family. The device works with a voltage of 2.5V for its supply voltage. 20 pins are available on it. In terms of electronic devices, this one is in the LV/LV-A/LVX/H family. Designed with 20 pins, it is compatible with a wide range of devices. Surface Mount is the method used for mounting this electronic part. In this device, there is a total of 2 ports available for use. Subcategory FF/Latches includes this part. Vsup reaches 5.5V as the maximum supply voltage. There are 3.3V power supplies required for this machine to operate. In order to operate properly, the supply voltage (Vsup) should be greater than 2V. Electronic circuits comprise 2 input lines. This device is well suited for TR based on its reliable performance. The output current of 16mA makes it feature maximum design flexibility.
SN74LV573ARGYR Features
20-VFQFN Exposed Pad package
74LV series
8 Bits
74LV573 family
20 pin count
20 pins
3.3V power supplies
SN74LV573ARGYR Applications
There are a lot of Texas Instruments SN74LV573ARGYR Latches applications.
- Avionics
- Hammer Device Information
- Motor Drives
- Display
- Buffer/Storage Registers
- Synchronous frequency dividers
- Display driver
- Relay replacement
- Timers
- Registers
