SN74LV573ATDGVRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 60.186038mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74LV573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 1 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV573ATDGVRE4 Overview
In the 20-TFSOP (0.173, 4.40mm Width) package, it can be found as an embedded module. Tape & Reel (TR) is the way in which it is packaged. It uses Tri-State as its output configuration. There is a logic type of D-Type Transparent Latch for this electrical device. The way in which this electronic part is mounted is Surface Mount. It operates at a voltage of 2V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. This FPGA is part of the 74LV series. 8 Bits are used in the design of this electronic part. As far as this device is concerned, it has no terminations. This type belongs to the 74LV573 family. The device works with a voltage of 5V for its supply voltage. It is equipped with 20 pin count. It is a member of the LV/LV-A/LVX/H family of electronic devices. 20 pins are used in its design. Surface Mount is used to mount this electronic part. In this device, there are 2 ports. It belongs to the subcategory of FF/Latches. There is a maximum voltage supply (Vsup) that reaches 5.5V. The system is powered by 5V sources. In order to operate properly, the supply voltage (Vsup) should be greater than 4.5V. Electronic circuits are represented by 8 input lines. Its reliable performance makes it an excellent choice for TR. Its output current of 16mA ensures maximum design flexibility.
SN74LV573ATDGVRE4 Features
20-TFSOP (0.173, 4.40mm Width) package
74LV series
8 Bits
74LV573 family
20 pin count
20 pins
5V power supplies
SN74LV573ATDGVRE4 Applications
There are a lot of Texas Instruments SN74LV573ATDGVRE4 Latches applications.
- Relay replacement
- Hammer Device Information
- High-speed logic
- Parallel data storage
- Shift left with parallel loading
- Programmable binary
- Synchronous frequency dividers
- Serial Output Register
- Counter control
- Buffer register
