SN74LV573ATDWR
| Parameters | |
|---|---|
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 1 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Translation | N/A |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV573 |
SN74LV573ATDWR Overview
The package in which it is embedded is named 20-SOIC (0.295, 7.50mm Width). The package is in the form of Tape & Reel (TR). It uses the output configuration Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. The way in which this electronic part is mounted is Surface Mount. It operates with a supply voltage of 2V~5.5V. There is a temperature of -40°C~85°C at which the system operates. This FPGA is part of the 74LV series. The electronic part in this image has 8 bits. This device has been designed with 20 terminations available. There is no doubt that it belongs to the family 74LV573. In order to operate it, the supply voltage must be 5V. There are 20 pins on it. This electronic device is categorized as a LV/LV-A/LVX/H electronic device. With the design of the board, there are only 20 pins. It is mounted according to the Surface Mount method. This device has 2 ports on board, which are all available at the same time. The part is in the FF/Latches subcategory. There are 5V power supplies required for this machine to operate. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. Based on its reliable performance, this device is well suited to TR. Its 16mA output current allows for maximum design flexibility. The supply voltage should be maintained at 5V for high efficiency. The maximal power current (ICC) supplied for its operation reaches 0.02mA.
SN74LV573ATDWR Features
20-SOIC (0.295, 7.50mm Width) package
74LV series
8 Bits
74LV573 family
20 pin count
20 pins
5V power supplies
SN74LV573ATDWR Applications
There are a lot of Texas Instruments SN74LV573ATDWR Latches applications.
- High-speed logic
- Communication systems
- Four-bit storage with output enable
- Parallel data storage
- Parallel data synchronization
- Relay replacement
- Pseudo-random code generators
- Parallel Output
- Buffer Storage
- Automotive ADAS
