SN74LV573ATNSR
| Parameters | |
|---|---|
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74LV573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 1 ns |
SN74LV573ATNSR Overview
The package in which it is embedded is named 20-SOIC (0.209, 5.30mm Width). This package has the format of Tape & Reel (TR). It is configured with an output of Tri-State. This electrical device has the logic type D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. There is no supply voltage for this device. A temperature of -40°C~85°C is used for operation. An FPGA of this type belongs to the 74LV series. The design of this electronic part contains 8 bits. As far as this device is concerned, it has no terminations. This type belongs to the 74LV573 family. In order to function, the supply voltage should be set to 5V. It has 20 pins that makes it easy to use. LV/LV-A/LVX/H is the family name of this electronic device. In addition, it is designed with a pin number of 20. Surface Mount is the way in which this electronic part is mounted. 2 ports are available on this device. This part can be found within the FF/Latches subcategory. It is possible to reach 5.5V when the maximum supply voltage (Vsup) has been reached. A total of 5V power supplies are needed to run it. There should be a voltage supply (Vsup) greater than 4.5V. There are electronic circuits attached to the 8 input lines. Based on its reliable performance, this device is well suited to TAPE AND REEL. The 16mA output current gives it maximum design flexibility.
SN74LV573ATNSR Features
20-SOIC (0.209, 5.30mm Width) package
74LV series
8 Bits
74LV573 family
20 pin count
20 pins
5V power supplies
SN74LV573ATNSR Applications
There are a lot of Texas Instruments SN74LV573ATNSR Latches applications.
- Multi-line decoders
- Shift register
- Automotive Body Electronics
- Buffer/Storage Registers
- Parallel Output
- A/D and D/A conversion
- Serial Output Register
- Stacked or Push-Down Registers
- Decade counting
- Timers
