SN74LV573ATNSRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74LV573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 1 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV573ATNSRG4 Overview
In the package 20-SOIC (0.209, 5.30mm Width), it can be found. Tape & Reel (TR) is the packaging method. Tri-State is used for the output it is configured with. D-Type Transparent Latch is the logic type of this electrical device. The way in which this electronic part is mounted is Surface Mount. It operates at a voltage of 2V~5.5V. There is -40°C~85°C operating temperature. In the 74LV series, this FPGA is located. This electronic part is designed with 8 Bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The family 74LV573 includes it. In order to operate it, the supply voltage must be 5V. 20 pins are included. It is a member of the LV/LV-A/LVX/H family of electronic devices. With the design of the board, there are only 20 pins. Mounting this electronic component follows the Surface Mount method. This device has 2 ports. There is a subcategory of FF/Latches for this part. It reaches 5.5V when the supply voltage (Vsup) reaches maximum. The device is powered by 5V power supplies. It is recommended to have a higher supply voltage (Vsup) than 4.5V. In the circuit, there are 8 input lines that are constituted by an electronic circuit. Based on its reliable performance, this device is suitable for TAPE AND REEL. As the output current is 16mA, the design flexibility is maximum.
SN74LV573ATNSRG4 Features
20-SOIC (0.209, 5.30mm Width) package
74LV series
8 Bits
74LV573 family
20 pin count
20 pins
5V power supplies
SN74LV573ATNSRG4 Applications
There are a lot of Texas Instruments SN74LV573ATNSRG4 Latches applications.
- Parallel data storage
- Sample and hold register
- Pattern generators
- Relay replacement
- Address register
- Network Switches
- Automotive ADAS
- Meter applications
- Up/down difference counting
- Data acquisition
