SN74LV573ATPW
| Parameters | |
|---|---|
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LV573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Propagation Delay | 14.5 ns |
| Turn On Delay Time | 1 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Translation | N/A |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
SN74LV573ATPW Overview
There is an embedded version of it in package 20-TSSOP (0.173, 4.40mm Width). The package is in the form of Tube. It uses the output configuration Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. A Surface Mount mount is used for mounting this electronic part. A 2V~5.5V supply voltage is required to operate it. A temperature of -40°C~85°C is set as the operating temperature. The 74LV series is associated with this FPGA. The design of this electronic part is based on 8 bits. This device is designed with 20 terminations. There is no doubt that it belongs to the family 74LV573. In order to function, the supply voltage should be set to 5V. It has 20 pins that makes it easy to use. In terms of electronic devices, this one is in the LV/LV-A/LVX/H family. In addition, it is designed with a pin number of 20. Electronic parts are mounted using the Surface Mount method. This device is equipped with 2 ports. This part can be found within the FF/Latches subcategory. There are 5V power supplies attached to it. It contains 8 input lines where electronic circuits are present. With 16mA, maximum design flexibility is ensured. If you want to achieve high efficiency, make sure the supply voltage is at 5V. In order to operate properly, its maximum power current (ICC) should be 0.02mA.
SN74LV573ATPW Features
20-TSSOP (0.173, 4.40mm Width) package
74LV series
8 Bits
74LV573 family
20 pin count
20 pins
5V power supplies
SN74LV573ATPW Applications
There are a lot of Texas Instruments SN74LV573ATPW Latches applications.
- Parallel Input
- Automotive ADAS
- Shift left with parallel loading
- Data acquisition
- Frequency
- OC-48 communication systems
- General-Purpose Register
- Communication systems
- Storage
- Parallel-to-Serial Data Conversion
