SN74LV573ATPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LV573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Propagation Delay | 14.5 ns |
| Turn On Delay Time | 1 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Translation | N/A |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV573ATPWR Overview
There is an embedded version of it in package 20-TSSOP (0.173, 4.40mm Width). Tape & Reel (TR) is the packaging method. In this configuration, the output is set to Tri-State. This electrical device has Logic type D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. In order for it to operate, it needs a supply voltage of 2V~5.5V. There is a temperature of -40°C~85°C at which the system operates. The 74LV series contains FPGAs of this type. It is designed with 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. The family in which it belongs to is 74LV573. In order to operate it, the supply voltage must be 5V. With 20 pins, it is equipped. In terms of electronic devices, this one is in the LV/LV-A/LVX/H family. With the design of the board, there are only 20 pins. It is mounted according to the Surface Mount method. This device has 2 ports on board, which are all available at the same time. In the subcategory Bus Driver/Transceiver, this part belongs. The device is powered by 5V power supplies. In the circuit, there are 8 input lines that are constituted by an electronic circuit. Based on its reliable performance, this device is well suited to TR. The 16mA output current gives it maximum design flexibility. High efficiency requires maintaining the supply voltage at 5V. As its maximal power current (ICC) reaches 0.02mA, it is able to operate.
SN74LV573ATPWR Features
20-TSSOP (0.173, 4.40mm Width) package
74LV series
8 Bits
74LV573 family
20 pin count
20 pins
5V power supplies
SN74LV573ATPWR Applications
There are a lot of Texas Instruments SN74LV573ATPWR Latches applications.
- Up-Down Johnson
- Sample and hold register
- Hammer
- Parallel Input
- Avionics
- Automotive Cluster
- Audio and video switching
- Automatic test equipment
- Communication systems
- Display driver
