SN74LV574AGQNR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFBGA |
| Number of Pins | 20 |
| Weight | 21.687385mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74LV |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LV574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 205MHz |
| Propagation Delay | 19.6 ns |
| Turn On Delay Time | 4.8 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 16mA 16mA |
| Max Propagation Delay @ V, Max CL | 5.7ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 1.8pF |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 45000000Hz |
| Length | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LV574AGQNR Overview
It is embeded in 20-VFBGA case. D flip flop is embedded in the Cut Tape (CT) package. T flip flop uses Tri-State, Non-Invertedas its output configuration. It is configured with the trigger Positive Edge. Surface Mountmounts this electrical part. Powered by a 2V~5.5Vvolt supply, it operates as follows. It is at -40°C~85°C TAdegrees Celsius that the system is operating. Logic flip flops of this type are classified as D-Type. It belongs to the 74LVseries of FPGAs. You should not exceed 205MHzin the output frequency of the device. The element count is 1 . There is a consumption of 20μAof quiescent energy. It has been determined that there have been 20 terminations. The 74LV574family includes it. It is powered by a voltage of 2.5V . Its input capacitance is 1.8pF farads. This D flip flop belongs to the family of LV/LV-A/LVX/H. Electronic part Surface Mountis mounted in the way. Basically, it is designed with a set of 20 pins. This device exhibits a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. Flip flops designed with 8bits are used in this part. Vsup reaches 5.5V, the maximal supply voltage. The supply voltage (Vsup) should be maintained above 2V for normal operation. 8 circuits are used to achieve its superior flexibility. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. A total of 2ports are embedded in the D flip flop. Currently, there are 3 lines of input.
SN74LV574AGQNR Features
Cut Tape (CT) package
74LV series
20 pins
8 Bits
SN74LV574AGQNR Applications
There are a lot of Texas Instruments SN74LV574AGQNR Flip Flops applications.
- Load Control
- Computing
- Test & Measurement
- Bounce elimination switch
- Communications
- Data Synchronizers
- Differential Individual
- Supports Live Insertion
- 2 – Bit synchronous counter
- EMI reduction circuitry
