SN74LV574APWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Frequency | 175MHz |
| Pin Count | 20 |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 16mA |
| Propagation Delay | 19.6 ns |
| Turn On Delay Time | 4.8 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 8 |
| High Level Output Current | -16mA |
| Low Level Output Current | 16mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.15mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LV574APWRG4 Overview
The item is packaged in TSSOPcases. D latch consists of 1 elements. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. It is powered by a voltage of 2.5V . LV/LV-A/LVX/His the family of this D flip flop. Electronic part Surface Mountis mounted in the way. With its 20pins, it is designed to work with most electronic flip flops. A Positive Edgeclock edge trigger is used in this device. The part is included in FF/Latches. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. The power supply is 3.3V. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. A high level output current of -16mAis set. There is no low level output current set at 16mA. A temperature below 85°Cshould be used for operation. Operating temperatures should be above -40°C. Normally, it operates with a voltage of 2VV as its minimum supply voltage. In this case, it supports a maximum supply voltage of 5.5V. The frequency that can be achieved is 175MHz. This logic IC is BUS DRIVER. It is equipped with 1 Functions . The D latch is equipped with 20 pins. 16mA provides maximum design flexibility due to its output current.
SN74LV574APWRG4 Features
20 pins
3.3V power supplies
1 Functions
20 pin count
SN74LV574APWRG4 Applications
There are a lot of Texas Instruments SN74LV574APWRG4 Flip Flops applications.
- Synchronous counter
- Individual Asynchronous Resets
- Frequency Dividers
- Test & Measurement
- Automotive
- Matched Rise and Fall
- Set-reset capability
- Buffer registers
- Modulo – n – counter
- Guaranteed simultaneous switching noise level
