SN74LV74AD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Base Part Number | 74LV74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 12mA |
| Clock Frequency | 140MHz |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 9.8 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 12mA 12mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 45000000Hz |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV74AD Overview
As a result, it is packaged as 14-SOIC (0.154, 3.90mm Width). It is contained within the Tubepackage. Currently, the output is configured to use Differential. It is configured with the trigger Positive Edge. The electronic part is mounted in the way of Surface Mount. With a supply voltage of 2V~5.5V volts, it operates. In this case, the operating temperature is -40°C~125°C TA. This electronic flip flop is of type D-Type. This type of FPGA is a part of the 74LV series. Its output frequency should not exceed 140MHz. It consumes 20μA of quiescent The number of terminations is 14. The 74LV74 family contains it. It is powered from a supply voltage of 2.5V. Its input capacitance is 2pFfarads. Devices in the LV/LV-A/LVX/Hfamily are electronic devices. Electronic part Surface Mountis mounted in the way. The electronic flip flop is designed with pins 14. This device has Positive Edgeas its clock edge trigger type. The RS flip flops belongs to FF/Latches base part number. The maximal supply voltage (Vsup) reaches 5.5V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. 2 circuits are used to achieve its superior flexibility. It runs on 3.3Vvolts of power. The 12mA output current allows it to be designed with the greatest amount of flexibility.
SN74LV74AD Features
Tube package
74LV series
14 pins
3.3V power supplies
SN74LV74AD Applications
There are a lot of Texas Instruments SN74LV74AD Flip Flops applications.
- Digital electronics systems
- Latch-up performance
- Count Modes
- Data storage
- Single Down Count-Control Line
- Individual Asynchronous Resets
- Frequency Dividers
- Cold spare funcion
- Set-reset capability
- Control circuits
