SN74LV74APWT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 12mA |
| Clock Frequency | 140MHz |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 9.8 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 12mA 12mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 45000000Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV74APWT Overview
The package is in the form of 14-TSSOP (0.173, 4.40mm Width). You can find it in the Tape & Reel (TR)package. Currently, the output is configured to use Differential. It is configured with a trigger that uses Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2V~5.5V. It is operating at a temperature of -40°C~125°C TA. It belongs to the type D-Typeof flip flops. JK flip flop is a part of the 74LVseries of FPGAs. A frequency of 140MHzshould be the maximum output frequency. As a result, it consumes 20μA of quiescent current without being affected by external factors. The number of terminations is 14. D latch belongs to the 74LV74 family. Power is supplied from a voltage of 2.5V volts. The input capacitance of this T flip flop is 2pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. This D flip flop belongs to the family of LV/LV-A/LVX/H. This electronic part is mounted in the way of Surface Mount. There are 14pins on it. Its clock edge trigger type is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. It reaches the maximum supply voltage (Vsup) at 5.5V. Normal operation requires a supply voltage (Vsup) above 2V. Despite its superior flexibility, it relies on 2 circuits to achieve it. In light of its reliable performance, this T flip flop is well suited for TR. It runs on 3.3Vvolts of power. As a result of its output current of 12mA, it is very flexible in terms of design.
SN74LV74APWT Features
Tape & Reel (TR) package
74LV series
14 pins
3.3V power supplies
SN74LV74APWT Applications
There are a lot of Texas Instruments SN74LV74APWT Flip Flops applications.
- Common Clocks
- Registers
- Power down protection
- Guaranteed simultaneous switching noise level
- CMOS Process
- Event Detectors
- Storage Registers
- Data transfer
- Automotive
- Balanced Propagation Delays
